![]() |
Can the JUSTSTOCK ESC be used with 1 Cell 1/12 scale if I run a Booster or receiver pack?
|
Originally Posted by Shawn68z
(Post 11190172)
If your brakes are working then the ESC has done its job, and you have a chassis handling, or driving issue. Your tires only have a limited amount of grip, if they are using all of the grip to slow/stop your car then there wont be enough grip to also change the direction of the car. Thats why it wont turn, and pushes to the outside of the corner.
If you drive a full size car the same thing happens, and you should NEVER be using your brakes IN the Corner. You should either be letting the chasiss ROLL, or slight acceleration to pull the car around, and out of the corner. Hope this helps you, Shawn.
Originally Posted by DaTaz
(Post 11190190)
What do you exactly mean?
You can't steer the wheel while braking? Your wheels steer but your car keeps on going straigth? If your car can't steer (but wheels do) while braking, that's exactly what Shawn68z said. Otherwise, it's a battery problem, not enough current available. |
Can i use hobbywing v3 for pro stock 17.5 racing?
Is the performance Good to take podium? |
Originally Posted by b.wihardja
(Post 11193554)
Actually i thought i can do a late braking
Yes, my wheel steer but the car is going straight, maybe i should try lowering brake rate or do something with exponential brake setting You should brake when inline, release the brake so that your car will sit on its 4 wheels (instead of only fronts) then turn. Otherwise, either your car won't steer (that's what happening) or it will be so front-balanced that it will spin aroud the front drive train |
Originally Posted by MR-RMS
(Post 11193330)
Can the JUSTSTOCK ESC be used with 1 Cell 1/12 scale if I run a Booster or receiver pack?
|
Originally Posted by TCCustoms
(Post 11190980)
what do you mean "out of sensor mode"?? IS that both red/green lights blinking even tho everything is still plugged in and untouched as mine does that quite a bit and dont notice until im pretty much done running a pack or testing w/o the body
when it does that the motor cogs like crazy and runs like complete crap because your basically in sensorless mode |
Originally Posted by Zooberg
(Post 11194151)
Can i use hobbywing v3 for pro stock 17.5 racing?
Is the performance Good to take podium? |
Originally Posted by Aoh
(Post 11194413)
yup!
when it does that the motor cogs like crazy and runs like complete crap because your basically in sensorless mode |
Originally Posted by Zooberg
(Post 11194151)
Can i use hobbywing v3 for pro stock 17.5 racing?
Is the performance Good to take podium? Now as for podium finish thats all up to the individual and his skills not really related to esc |
Originally Posted by MR-RMS
(Post 11193330)
Can the JUSTSTOCK ESC be used with 1 Cell 1/12 scale if I run a Booster or receiver pack?
|
So I've got a juststock esc on the way and was wondering where to get and how to install a booster for 1s...
|
Hi Guys
Have anyone loaded HW v3.1 on a SP GT2.0 Pro? Wanted to try the HW software om MY GT2, but would like to know if it will work and maybe even work better that the SP firmware. Thanx |
I'm having an issue with a 120A 1S ESC that I am using in 12th. I lose steering well before the pack has reached the end of its useful life. I'm using a 27MHz FM KO radio and receiver, and a Futaba digital servo. If I use a receiver pack the issue goes away. Do I have a fault with the ESC somewhere, or is it that the 27MHz gear needs more power than the ESC was designed for?
|
Originally Posted by Radio Active
(Post 11197402)
I'm having an issue with a 120A 1S ESC that I am using in 12th. I lose steering well before the pack has reached the end of its useful life. I'm using a 27MHz FM KO radio and receiver, and a Futaba digital servo. If I use a receiver pack the issue goes away. Do I have a fault with the ESC somewhere, or is it that the 27MHz gear needs more power than the ESC was designed for?
I think it may be that the servo being digital (and perhaps brushless/coreless) draws more current than you can give it. It may be a problem with the analog-digital combo too. |
Originally Posted by puma303
(Post 11172567)
Hello to all
boys finally today I bought my first 1/10 (HB TCX) and the XERUN 120a 2.1, I wanted to ask for help: what firmware you advise me to install and which setup how can I start? thanks to those who will answer.
Originally Posted by puma303
(Post 11192713)
the motor is a Lipotech XR 10.5T SPECIAL KIT, I do not know the class. It 'a few days ago that I use the electric.
|
| All times are GMT -7. It is currently 03:01 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.