|
Originally Posted by xraydad
(Post 10746129)
+2
http://www.teamcrc.com/crc/modules.p...prodID=7719295 click on the highlighted usb link software on this page |
Originally Posted by Warren Weaver
(Post 10746267)
Go to crc they have it compressed already and works perfectly
http://www.teamcrc.com/crc/modules.p...prodID=7719295 click on the highlighted usb link software on this page |
Can the brake to power off be disabled?
At the track running my V3 tonight. Still loving it in mod. |
reset your voltage cutoff to 3.0 volts from auto and car will stop cutting out and data will record right temp
|
Wait a tic.. You can use 2S Lipo's with the 120a 1s Speedo's? Just put the heatsync and fan on it?
Originally Posted by hyujmn
(Post 10725957)
Got a question for you guys.
I just ordered a Hobbywing 120a 1s v2.1 to use in a 17.5 stock sedan with 2s lipos. I plan on switching out the heatsink and putting the fan on, etc etc... Is there anything else I need to do besides just soldering on the motor to get this working? Also, I read that the 120a comes with the mod firmware. I don't have an LCD program box to upload the stock firmware, so is there anyway to turn the boost/timings off? I looked at hte manual, and it looks like you can't set the boost to 0. Any help here? EDIT: Sorry, I'm super new to all this stuff. I noticed that I can set Boost Timing to 0 and Turbo Timing to Off, but the boost RPM will always still be at 15000 RPM. If both of the timings are off, the boost shouldn't kick in right? |
Originally Posted by lip
(Post 10745974)
duhhhhhh
:lol: What an idiot I am....I've had a motor with these before and never realized they were bullet connectors..... Anyone have experience with the hobbywing motors... |
Originally Posted by MWarren
(Post 10745392)
I've just downloaded the USB link software v3.1 but I can't extract the files. Winrar keeps saying the file is corrupt. Has anyone managed to load this yet?
Thanks Michael :confused: |
The usb update v3.1 only for the v3 esc the link has been fixed you can now download it on the hobbywing website.
|
Originally Posted by PhotoGreg
(Post 10747635)
Wait a tic.. You can use 2S Lipo's with the 120a 1s Speedo's? Just put the heatsync and fan on it?
The big difference, at least for the Hobbywing, is that the 1s-2s has built-in BEC booster, while the 2s-3s doesn't have that (it works on 1S, but the BEC output is the same value than the battery output, so 4.2V max, that's why you need a BEC Booster to increase the value up to 5V or 6V). If you think that you may run 1s car sometimes, you can go for the 1s-2s ESC. If you are sure to run 2s only (or sometimes 3s), the 1s is not necessary. |
After i have finished my run the speedy will not switch off, i push the switch and the speedy goes off for about 1/2 a sec then powers up again, im thinking it must be to hot.
i have tried to use the internal temp function but cant seem to get that to work, but it doesnt feel overly hot, and after leaving it for about 20 secs then will switch off, can any offer my some help. Rhys |
Originally Posted by crabboy
(Post 10748110)
After i have finished my run the speedy will not switch off, i push the switch and the speedy goes off for about 1/2 a sec then powers up again, im thinking it must be to hot.
i have tried to use the internal temp function but cant seem to get that to work, but it doesnt feel overly hot, and after leaving it for about 20 secs then will switch off, can any offer my some help. Rhys Any ideas? |
Originally Posted by PhotoGreg
(Post 10747635)
Wait a tic.. You can use 2S Lipo's with the 120a 1s Speedo's? Just put the heatsync and fan on it?
Btw can you use the digital led program card (the small ones) with the v2.1?? On the card, it says for use with 2.0, so I didn't know if it works. |
Originally Posted by COBRARACING
(Post 10748028)
The usb update v3.1 only for the v3 esc the link has been fixed you can now download it on the hobbywing website.
|
There are 2 new software versions ,one is "120504",other is "120511_Beta"
We have fixed the following bugs: 1.Sometimes the TH has no response when you activate Forward Throttle TH . 2. The ESC Temp record is more accurate， 3. more power output ,especially for modified motors . The "120511_Beta" is more powerful than "120504", But it is a new software , we have not done much testing ,so it is a Beta version |
Hey guys, If anybody is interested, i have a blue 1cell v2.1 with heatsink on it, i have all the original boxing for it as well as the lcd program box and the 2-in-1 lcd box. All very lightly used, this esc has never seen anything less than a 10.5 on one cell and 13.5 on 2 cell. Would like $95 shipped. PM me:nod:
|
| All times are GMT -7. It is currently 03:59 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.