|
21.5 SETTINGS
Originally Posted by J SiN
(Post 9583130)
Really need help with settings for 21.5t
I have tried 4 different setups from people for 21.5t but it killed 2 motors. 1 SP MMM 21.5t motor that was at 58 deg and a team powers motors that overheated in 3 mins with the same settings. both times the motor was slow and the run before hand had really low temps in the 30's. my FDR was 6.3 to 6.6 Thanks for the help in advance. Looking back at what happened on the weekend and notes back at work. Start with the FDR at approx 6.3 but run the BOOST timing at 36 Deg, TURBO timing at 24 Deg. Stay at 18 for TURBO slope ramp. DRRS at 8. BOOST start RPM at 6000, BOOST timing at 450 and TURBO delay at .4. This will be a safe start point. From here play with the BOOST start RPM and Boost timing Acc in small steps and keep temping.... Cheers Ren :cool: |
Originally Posted by COBRARACING
(Post 9587348)
Run in administration mode on your pc and you will find it ill work .:nod:
Even in run as admin mode. |
Originally Posted by bjspinner
(Post 9587443)
Did try that, could only upgrade from 518S to ver3.0 119S cannnot go backwards from 211S to(ver3 119S or any other program).
Even in run as admin mode. regards Angelo |
stock timing on 1s?
Can you load all the latest stuff on the 1s Angelo and would you know what a 1s weighs?
|
I have the Ezrun 150A Pro V2 the black one is there any need to update the firm ware in that >
|
Originally Posted by Madulla
(Post 9584888)
On a side note, I don't know why so many people cook their motors. Ever heard of a temp gun. "I cooked my motor, switched it out to another and cooked that one"??? Temp every minute after you make changes to make sure its not overheating. Then you will know if you can complete a run without burning anything up.
|
Hi I have been running the 21.5 in the STCC this year. I have mainly used the Corally motor as the alternative wind generates fair more torque. However you can use the settings off my website as a starting point:- ( http://www.stockracer.co.uk/hobbywing.html ) The Corally motors are very delicate so these settings should be pretty gentle on other style of motors
Originally Posted by J SiN
(Post 9583130)
Really need help with settings for 21.5t
I have tried 4 different setups from people for 21.5t but it killed 2 motors. 1 SP MMM 21.5t motor that was at 58 deg and a team powers motors that overheated in 3 mins with the same settings. both times the motor was slow and the run before hand had really low temps in the 30's. my FDR was 6.3 to 6.6 Thanks for the help in advance. |
Originally Posted by TryHard
(Post 9560317)
No idea why that would be... I've got all the four most recent versions of the software installed (including 1224) on my Win7 PC, and everything shows up fine...
|
Originally Posted by olly986
(Post 9589664)
Hi just to know, do you run W7 32 or 64 ?
|
Originally Posted by Dinukap4
(Post 9588647)
I have the Ezrun 150A Pro V2 the black one is there any need to update the firm ware in that >
Cheers :) |
Originally Posted by TryHard
(Post 9590642)
Win7 32 :nod:
Originally Posted by Dinukap4
(Post 9590908)
CAN SOME ONE HELP ME PLEASE! I CAN'T UNDERSTAND WHATZ GOING ON ?
Cheers :) |
Originally Posted by olly986
(Post 9591790)
mine is a 64, maybe this is the problem...
Someone said above that you could not update to certain version, which one do you have, it will help to know to answer you;) This is the ESC i cant find it on Hobbywing website why is that :weird: |
lrp x11 13.5T
hi guys,
you have any ideas of good setup for an LRP x11 13.5T motor? what software to use and what settings. i am new to the speedo and software djungle. any help appreciated! :) greets v |
Originally Posted by Dinukap4
(Post 9591826)
http://www.rcecho.com/hobbywing-ezru...a-esc-1-8.html
This is the ESC i cant find it on Hobbywing website why is that :weird: it looks like this one (on HW site) no? http://www.hobbywing.com/english/Art...?ArticleID=429 The one you have, if it is from the site you gave us is coming from Hong-Kong, can it be a copy Angelo?? |
Originally Posted by vitomon
(Post 9591859)
hi guys,
you have any ideas of good setup for an LRP x11 13.5T motor? what software to use and what settings. i am new to the speedo and software djungle. any help appreciated! :) greets v Something like that, and go from there.... |
| All times are GMT -7. It is currently 12:38 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.