I'm after a Xtremestock ESC in Australia in Black

Anyone know where a good seller is?

I should be able to get you one in about 2 days if you are stuck

also check the sensor socket on the esc for bent pins if all else fails then there is damage to one of the phases a b or c and that relates to open circuit mosfets.

yes they are the capacitors

are they the exact same type compared to the external ones included with the rest of HW's ESCs?

Yes the same ones just the external ones are surface mounted and the ones on the esc are built in axial/through hole .same mf specs.

We will be doing some fine tuning of the current software soon but i can tell you the next release will be for the 508 zero timing and it will feature the same brake options as the 211 25% 50% 75% 100% etc etc .

Any news yet on the xerun 5.5t motor that is being offered on the website i send you that presumebly has the same construction as the 8.5t -17.5t xerun motors?

The following motors have the same construction

5.5T,6.5T,8.5T,10.5T,11.5T,13.5T,17.5T 21.5T all have fixed timing

3.5T,4.5T have end bell timing

And there all roar approved .

Can the HW 120a ESC handle a short course 550 motor?
I'm thinking about changing to a Losi Ten SCTE and was checking to see if I can use my current 120a.

thanks, so the 5.5t motor shown on the hobbywing website is an old motor type? If so why is that old picture still on the hobbywing website?

Not doubting your anwser but just want to make sure that the picture on the HW website is old and should in fact be the much nicer looking new version. :D

yes it can run on the 120 amp;)

It just seems our website guru hasnt made the changes for the old for the new design motor.:flaming:

thanks for the clarification.

Hi guys

We have a little delay for the v3 120 amp .we are trying to bring you an esc that can do what the 1s and the normal 120 amp did in one unit etc .without you having to buy a 2 esc's to do the same job .

so please be patient with us while we test different dc/dc booster ic's so far we are on the right track but we want it to be perfect so the design and testing will continue we will keep you posted .

have a great weekend people .

regards Angelo