NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#2326
Tech Apprentice
hey guys what program do I need to open up the usb software? The disk that came with my esc comes up blank on my computer? I want the new stock firmware but I cant find the right programs to open up the software? Any help would greatly be apreciated!
#2327
TRX B E - you will need winrar to open the download which is a free software program.
Okay due to work my day of testing is not going to happen tomorrow now and i have i race on sunday, with the 101224 software with 13.5 brushless in touring cars going, are the settings close to the suggested settings or slightly different. profile numbers would be brill if posted.
thanks in advance
Okay due to work my day of testing is not going to happen tomorrow now and i have i race on sunday, with the 101224 software with 13.5 brushless in touring cars going, are the settings close to the suggested settings or slightly different. profile numbers would be brill if posted.
thanks in advance
#2328
Nice to hear, with the speedtrap it`s so easy to tune the HW...
Did you noticed any difference on the turbo? With the old software it always was very smooth and i never noticed when it kicked in, with the Tekin it was 100% different, thats just like a second stage.
Hope it is still very smooth....Noticed any gain in topspeed or acceleration in the higher rpm`s?
Did you noticed any difference on the turbo? With the old software it always was very smooth and i never noticed when it kicked in, with the Tekin it was 100% different, thats just like a second stage.
Hope it is still very smooth....Noticed any gain in topspeed or acceleration in the higher rpm`s?
I really think only boost timing is enough for our track, (for most tracks I even believe, for 1/12 scale)
The turbo timing is nice, but is a big energy consumer (or heating system ), which in the end of a 8 minutes final kills your performance.
Check once more my times on mylaps, and take into consideration, that the first 3 sessions were driven with the same Lipo...
http://www.mylaps.com/practice/showL...date=12-1-2011
If you check the topspeed, you can see that even after 6 minutes I am still able to drive 59!....
If you check the 9th of January (the clubrace, only the first qualifier is there, then the computer crashed. ), you can see that the speed drops a lot more, this was with the 518 firmware....
This drop in topspeed gives you a good picture about the performance of the whole system (battery, ESC, motor) during the run, the drop in topspeed on the straight end, tells you that you will also loose performance in the infield...
#2329
Just download it from here http://www.cobrarc.com.au/ (thanks Cobra!)
And download the free "7-zip" program to unpack it.
#2330
Tech Apprentice
Nobody
Hi guys.
Is there somebody that can help me?
I would like to use my Hobbywing 120A v2.1 fw 528 with a lrp x12 10.5t.
Which is the best set up that help also to mantain low temperature so that i can avoid damages?
best FDR (a range of course) ?
Thank you so much in advance!
Is there somebody that can help me?
I would like to use my Hobbywing 120A v2.1 fw 528 with a lrp x12 10.5t.
Which is the best set up that help also to mantain low temperature so that i can avoid damages?
best FDR (a range of course) ?
Thank you so much in advance!
#2331
#2332
Hi guys.
Is there somebody that can help me?
I would like to use my Hobbywing 120A v2.1 fw 528 with a lrp x12 10.5t.
Which is the best set up that help also to mantain low temperature so that i can avoid damages?
best FDR (a range of course) ?
Thank you so much in advance!
Is there somebody that can help me?
I would like to use my Hobbywing 120A v2.1 fw 528 with a lrp x12 10.5t.
Which is the best set up that help also to mantain low temperature so that i can avoid damages?
best FDR (a range of course) ?
Thank you so much in advance!
Run the 518 stock software with the recommended settings from the hobbywing PDF; those settings are on the conservative side.
#2333
Tech Apprentice
sorry. i mean sp fw 528stock, not modified fw
#2334
#2335
Tech Apprentice
Guys, tell me please, what software use for a stock 17.5T ? Boost it is not necessary, because it is forbidden at competitions.
( lrp x12 17.5T and xerun 2.0 )
( lrp x12 17.5T and xerun 2.0 )
#2336
#2337
set up Blues
Hello Ive updated me FW to the 224 and there is alot of new setting then the old one .. Does any one have any recommended set up for a 11.5 T orion ?
__________________
~www.driftmonkeys.org~
__________________
~www.driftmonkeys.org~
#2339
Recommended Setups
here's the link Cobra posted:
http://www.filefactory.com/file/b4g9...are_110106.doc
download the word document and scroll right to the bottom for recommended settings
I tried the 11.5t recommended settings and it worked well. Compared to the previous recommended settings for fw518, motor temps for fw224 were 10deg celcius cooler with the same fdr (6.5) that i was running.
http://www.filefactory.com/file/b4g9...are_110106.doc
download the word document and scroll right to the bottom for recommended settings
I tried the 11.5t recommended settings and it worked well. Compared to the previous recommended settings for fw518, motor temps for fw224 were 10deg celcius cooler with the same fdr (6.5) that i was running.
#2340
Tech Regular
iTrader: (1)
Hi Guys,
Just updated my unit to the new V1.63_110108 firmware (SP V3 13.5) and I cant set the turbo timing (#12) to anything higher than 12 degrees.
Is that normal?
Additional info doc mentions 16deg timing as recommended setting.
What have I done wrong?
Cheers
Andrew
Just updated my unit to the new V1.63_110108 firmware (SP V3 13.5) and I cant set the turbo timing (#12) to anything higher than 12 degrees.
Is that normal?
Additional info doc mentions 16deg timing as recommended setting.
What have I done wrong?
Cheers
Andrew