|
Originally Posted by MattW
Does anyone have a view on ENSA setting/diodes?? specifically when running mod - 7 turn.
IIIRC, the manual says that with ENSA on stock setting (100) you shouldn't run any motor diodes - however, if you lower the value you can run diodes. Has anyone tried both settings. I have a much more 55A diode pack sitting around that i have used with my KO speedo, but not tried ti with the Rapida. I have been really struggling at the last couple of meetings with breaking - breaks fading during the run (motor heat i suspect), just wondering if running a big diode with the ENSA lower would help. I run two Novak 36amp schottky diodes with my Rapdia Pro using 7 & 8 turn motors and don't seem to run short on brakes, (but I do prefer softer brakes then most). Have you tried running a fan on your motor? This may stop the motor from overheating and causing the fade.... Regards, Peter :D |
Peter, it's just one of those things that i've been thinking of recently. How do you run your ENSA setting with those diodes??
|
I used to run AdrianM's recommendation on 23T without diodes and ensa at 100%. Last race i had Straight diodes, 0% ensa and heatsink glued to the fets with light coat of metal epoxy...AWESOME!
|
Originally Posted by MattW
How do you run your ENSA setting with those diodes??
|
Where is a good place to buy a Keyence? Only place I have seen them is on ebay and there is a Flash and Exstraight esc's on there. I don't know if those are any good.
|
Originally Posted by porschejim911
Where is a good place to buy a Keyence? Only place I have seen them is on ebay and there is a Flash and Exstraight esc's on there. I don't know if those are any good.
Schumacher USA - see Adrian Martinez Precision RC - Hong Kong Champ RC - Japan (this is where I got mine from, very good service) I'm sure there are more places around the world. But these places are good to deal with. Hope this helps, Leonard. |
Don't forget www.speedtechrc.com.
|
i just bought Keyence Zero V Extreme....this is my first Keyence i have. just want to know, is this ESC fragile or not??
|
Originally Posted by t4m1y4niac
i just bought Keyence Zero V Extreme....this is my first Keyence i have. just want to know, is this ESC fragile or not??
|
I've had one in my Mini for a while now, and the rolls and flips it takes, man, I'm surprised my Rapida Pro still is working 100% the way it's been treated.. it's built solid!
I'm sure the Zero-V is built in the same fashion, so I wouldn't worry.. |
thanks guys...i'm not so worry now..but i stiill cannot use it for race yesterday (at last i used my LRP QC), i can't properly set up it...
|
hey guys,due to abuse,my rapida pro needs to be reconditioned,as in a new case and buttons etc. is there anyone around that can do it for me?its a great speedo,i just want it back to its former glory :p
|
hey guys
having problems with my keyence, as soon as i turn my car on the motor starts running is there a way to reset the speedo or do i need to send it back thanks for the help |
Just follow the instructions for recalibrating the speedo with your radio.. it's probably just off-center.. does it stop when you hit the brake?
Does it show 100% brake when you do? If not, it's just the throttle trim on the radio.. I've found it goes a forward automatically if my radio's not on.. I gather the servo is responding properly? |
It'll also go forward on its own if the plug to the receiver is in the wrong way round in the reciever.
|
| All times are GMT -7. It is currently 09:27 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.