|
Originally Posted by civiclized esi
(Post 7087678)
Hi guys and gals, ordered my M11X and can't wait for it to arrive, as you can see I stay in singapore and currently sourcing for tx and rx Battries, you guys and gals know of any online stores in Hong Kong that sell battries for M11X's tx and rx and will these servos HVS-ZS and HVS-ZV work with RX451. Tahnks in advance.
|
Originally Posted by civiclized esi
(Post 7087678)
Hi guys and gals, ordered my M11X and can't wait for it to arrive, as you can see I stay in singapore and currently sourcing for tx and rx Battries, you guys and gals know of any online stores in Hong Kong that sell battries for M11X's tx and rx and will these servos HVS-ZS and HVS-ZV work with RX451. Tahnks in advance.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=350313439504 |
Originally Posted by mjc168
(Post 7088614)
I got my tx lipo battery from rcmarket. ip 2300mah 2s 5c
Thanks mjc168 do you happen to have the part or order no for the batteries. just to double check web site is http://www.rcmart.com/ right. Thanks in advance.:nod: |
Originally Posted by leebrushless
(Post 7088531)
|
Got in contact with ABC Hobby and they have made the rain jacket / muff for Sanwa Japan. Also the 4PK muff is exactly the same as for the M11(x) and since i have that one i can use it :).
How about Lipo for the Sanwa M11X I see 2s is been used but will 3s possible or not the manual states it operates from 6.5 to 11 volts and since an 3s fully charged will be 12,6v this might be to high. Anyone has experiance on that one? Also i see 2S lifepacks on the web for the M11X but i have tried one and get botherd by low voltage warnings since 2S LIFE will ben 6.6V and close to the 6.5 level. Jerome |
Originally Posted by nsr250repsol
(Post 7088033)
I bought my M11X when I lived in Japan so I don't have an English manual. Does any one have a digital copy? I just started running nitro and want to use the failsafe function.
Thanks :eek: http://www.fulldownloadshare.com/fin...1X+manual.html or http://www.airtronics.net/index.php/...s3-2-4ghz.html |
The manual says "dont use a 3 cell lipo,thats a good enough of a warning not to try one for me. There have been posts earlier in the thread about using 2 cell lipo's & no problems with the low voltage settings. Iam still waiting on mine :(
Will look into the jacket, thanks for the info. Leigh.
Originally Posted by Pinky@MVW
(Post 7089198)
Got in contact with ABC Hobby and they have made the rain jacket / muff for Sanwa Japan. Also the 4PK muff is exactly the same as for the M11(x) and since i have that one i can use it :).
How about Lipo for the Sanwa M11X I see 2s is been used but will 3s possible or not the manual states it operates from 6.5 to 11 volts and since an 3s fully charged will be 12,6v this might be to high. Anyone has experiance on that one? Also i see 2S lifepacks on the web for the M11X but i have tried one and get botherd by low voltage warnings since 2S LIFE will ben 6.6V and close to the 6.5 level. Jerome |
Originally Posted by leebrushless
(Post 7090737)
google is your friend :D I havent tried the link though. Leigh
http://www.fulldownloadshare.com/fin...1X+manual.html or http://www.airtronics.net/index.php/...s3-2-4ghz.html Fulldownloadshare.com requires membership and if I remember correctly I don't think it's free either. I don't want to spend $10 a a manual from Airtronics either. I was just really hoping someone here already had it downloaded. |
I can scan & email you the failsafe pages if you like. Leigh
Originally Posted by nsr250repsol
(Post 7091356)
Google is normally my friend but not in this case.
Fulldownloadshare.com requires membership and if I remember correctly I don't think it's free either. I don't want to spend $10 a a manual from Airtronics either. I was just really hoping someone here already had it downloaded. |
|
Originally Posted by Pinky@MVW
(Post 7089198)
Got in contact with ABC Hobby and they have made the rain jacket / muff for Sanwa Japan. Also the 4PK muff is exactly the same as for the M11(x) and since i have that one i can use it :).
How about Lipo for the Sanwa M11X I see 2s is been used but will 3s possible or not the manual states it operates from 6.5 to 11 volts and since an 3s fully charged will be 12,6v this might be to high. Anyone has experiance on that one? Also i see 2S lifepacks on the web for the M11X but i have tried one and get botherd by low voltage warnings since 2S LIFE will ben 6.6V and close to the 6.5 level. Jerome http://rcmarket.com.hk/product_info....oducts_id=5507 |
Originally Posted by civiclized esi
(Post 7088739)
Thanks mjc168 do you happen to have the part or order no for the batteries.
just to double check web site is http://www.rcmart.com/ right. Thanks in advance.:nod: please check http://rcmarket.com.hk/product_info....oducts_id=6656 part number is IP-2300S2S |
Originally Posted by Sleepstream
(Post 7091552)
Anyway since i have found out that the 4PK version was the same and i had that one my problem was solved. Thanx anyway for the link since i must have one for an friend of mine. Jerome |
Finally received my M11X this evening:D
http://i627.photobucket.com/albums/t...7/IMG_2185.jpg http://i627.photobucket.com/albums/t...7/IMG_2186.jpg http://i627.photobucket.com/albums/t...7/IMG_2187.jpg http://i627.photobucket.com/albums/t...7/IMG_2188.jpg Now looking for transmitter bag hi hi |
Originally Posted by erevo09
(Post 7091456)
|
| All times are GMT -7. It is currently 02:08 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.