|
|
|
Finally in stock:
https://www.rcjuice.com/radio/receiv...ompatible.html Also a Futaba compatible receiver: https://www.rcjuice.com/radio/receiv...ba-radios.html |
POWERSTAR L Shape SANWA Receiver
Race tested - Race approved :nod: https://cimg0.ibsrv.net/gimg/www.rct...36fa05ca86.jpg https://cimg0.ibsrv.net/gimg/www.rct...1b8c337953.jpg |
Originally Posted by moparSRT
(Post 15430044)
POWERSTAR L Shape SANWA Receiver
Race tested - Race approved :nod: https://cimg0.ibsrv.net/gimg/www.rct...36fa05ca86.jpg https://cimg0.ibsrv.net/gimg/www.rct...1b8c337953.jpg |
Originally Posted by Teeyo
(Post 15431016)
Just ordered this Powerstar receiver from Ebay instead of the Hobbystar one for a new build since I had an issue with my Hobbystar HRX 472
|
Props to RCjuice, fast delivery and great packaging.
|
I just got the Powerstar RS472HV receiver. Tested on an Sanwa MT-4. FH4T works, and the radio is able to read the voltage off the receiver.
I am also running it on "HV" mode off a Hobbywing QuicRun 1080 ESC. Works well. |
Muchmore just released one as well. Not much data on their page yet.
http://www.muchmoreracing.net/produc....php?pidx=2810 https://cimg9.ibsrv.net/gimg/www.rct...f88dbecb36.jpg |
I have ARX-482 and same from coltech both working fine in racing condition. SSR and shr working corectly. And also SSL (VIA bat port) od working with Vortex zero telemetry and programing.
|
I have a small update on the SMD SRX2 (And I'd presume others using this case as I highly doubt they are different inside)
I've had cases of the car loosing connection to the transmitter (Exzes X) and running away at two tracks. Both of these have metal link fencing in close proximity to the track (i.e 2 ish car withs from the edge) Unfortunaly I do not own a genuine Sanwa internal antena reciver to compare to but I think it might be a limit of the internal antena recivers in general rather than these specific ones and the cars have worked fine with a pair of Sanwa recivers with wire antenas |
Originally Posted by AW106
(Post 15448468)
I have a small update on the SMD SRX2 (And I'd presume others using this case as I highly doubt they are different inside)
I've had cases of the car loosing connection to the transmitter (Exzes X) and running away at two tracks. Both of these have metal link fencing in close proximity to the track (i.e 2 ish car withs from the edge) Unfortunaly I do not own a genuine Sanwa internal antena reciver to compare to but I think it might be a limit of the internal antena recivers in general rather than these specific ones and the cars have worked fine with a pair of Sanwa recivers with wire antenas Post a pic. |
Originally Posted by 1/8 IC Fan
(Post 15448491)
How is your receiver mounted?
Post a pic. (Will update with Image once I'm back home. For now this is close to how mine is https://cimg4.ibsrv.net/gimg/www.rct...fb550c4a08.jpg |
Sanwa compatible receiver can also be found on Amazon.
|
Please, help needed !
I cannot bind my M17 transmitter with my RX491 receiver. I'm following the procedure : led of the receiver is rapidly flashing when it is connected with the transmitter on bind mode selection, but even after 5 minutes, the light of the receiver never get glows and bind is not done. I tried several time but still the same.. Receiver connection : CH1 : steering CH2 : ESC SSL : bing plug Transmitter selection : RF Mode : FH5 Response mode : SHR (with a SRT BH9027 servo) Is there something I have missed or doing wrong ? Thank you for your help. |
Originally Posted by mvert
(Post 15451217)
Please, help needed !
I cannot bind my M17 transmitter with my RX491 receiver. I'm following the procedure : led of the receiver is rapidly flashing when it is connected with the transmitter on bind mode selection, but even after 5 minutes, the light of the receiver never get glows and bind is not done. I tried several time but still the same.. Receiver connection : CH1 : steering CH2 : ESC SSL : bing plug Transmitter selection : RF Mode : FH5 Response mode : SHR (with a SRT BH9027 servo) Is there something I have missed or doing wrong ? Thank you for your help. This is the thread for non Sanwa branded (Sanwa Compatible) receivers. Thank you |
Just got the Hobbystar 482R (antenna-less) it is working perfect so far. I have the Hobbystar 471 in my buggy and I haven’t had any issues with it after a couple months of racing. |
|
powerstar RS472E L shape receiver
been running this reciever on my touring club racing and also in my 12th scale used it in a big event on a big track so far no issues similar speed and feel with my sanwa receiver just got my third one from HK showed up in a week thats service
|
Add Muchmore to the list. Works great on the bench. Was easy to bind and will be track tested in on road this weekend. https://cimg3.ibsrv.net/gimg/www.rct...72a95018c.jpeg |
Powerstar flawless so far
|
Originally Posted by STLNLST
(Post 15467277)
Add Muchmore to the list. Works great on the bench. Was easy to bind and will be track tested in on road this weekend. https://cimg3.ibsrv.net/gimg/www.rct...72a95018c.jpeg where did u buy the muchmore receiver at? |
Originally Posted by savage24x
(Post 15461498)
Bought one of these. We’ll see what happens! |
Where did u order from ? I can’t seem to find them online |
Originally Posted by yodace
(Post 15471933)
Where did u order from ? I can’t seem to find them online |
Hi,
does those compatible receiver have the telemetry ? ( At least the voltage, like a real rx-482 ) thanks cedric |
Yes, with sanwa ESC. Rpm, volt, ESC temp, motor temp.
|
Originally Posted by cedric02
(Post 15475294)
Hi,
does those compatible receiver have the telemetry ? ( At least the voltage, like a real rx-482 ) thanks cedric |
IMO the Powerstar RS472E is the one to get. The price is the best out of the others and mine has been working amazing for the last 3 months now. And the case looks great! Great customer service from the eBay dealer in Florida too. |
Powerstar reciever from RaceVTA, do they stock them in Florida? Or will it come from Hong Kong or some place? Don’t want to wait till August to receive one. LoL will be using with my MT4 in |
Originally Posted by mocrawlin
(Post 15479158)
Powerstar reciever from RaceVTA, do they stock them in Florida? Or will it come from Hong Kong or some place? Don’t want to wait till August to receive one. LoL will be using with my MT4 in |
great price on ebay
|
Originally Posted by platgof
(Post 15483369)
great price on ebay
|
Originally Posted by RC*PHREAK
(Post 15483967)
yes. for sure. i'd definitely go with the power star versions and avoid rcjuice's horrible customer service.
|
check bang-good out.
|
Just ordered a couple of $30 slidelogy's SDY-0191, supposedly 482 clones... will let you guys know :)
|
Installed the first slidelogy, the bench testing seems to work fine. And that bind button instead of the jumper plug makes the pairing a breeze. Need to go test at the track now :)
|
Have run a pack with the slidelogy, and seems to be doing very fine. Great purchase so far... hope the other 2 I bought are just as ok as this one! :D
|
Thats awesome, crazy to think that these alternatives for the price fit the bill just fine. My son runs one in his NT1 and obe in his DXF 1:8 car, and the have held up zhrough the season, even with high draw servos.
|
Any update on the long-term performance and reliability of the ARX-482R? They are very cheap on Amazon right now and thinking about picking one up
|
| All times are GMT -7. It is currently 03:22 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.