Speed Run Electric (All Classes Welcomed)
#167
Tech Addict
iTrader: (1)
Thanks stick, that was pretty much my concern, HEAT. I've been seeing some motors being advertised as 1s/2s motors. I don't have the money to waste on unnecessary melt downs. I'm not sure what I'm going to do yet. I'm definitely going to look into that Castle mentioned above.
#168
Tech Addict
Yup 120a esc is perfect for a Castle 5700kv on 4s. I ran mine with a mamba monster 2 which is 120a and the esc never broke a sweat. Get a good heatsink and fan for the motor and maybe even the esc and check motor temps every pass or 2. If you cant touch the motor for 3-5 seconds, let it sit and cool with the fans blowing.
#169
Tech Apprentice
Mugen mgt7 8S build
What's up fellas, as the title states I'm working on a mugen mgt7 eco build, just got the kit and in the process of building it! It's going to be an 8S setup, mamba xlx with Poseidon 1700kv! I just wanted to introduce myself and ask for any input at all as far as gearing goes, obviously I'm going to be running at least 1:1 ratio, just wondering if there's any mods necessary to do so and if so what! Also are there any bodies like the Serpent 977e body available for the mgt7? Abby info would be greatly appreciated! Thanks, Mike
#170
TC4 basher is the mugen master with worlds fastest..
#171
Tech Addict
#172
Tech Addict
What's up fellas, as the title states I'm working on a mugen mgt7 eco build, just got the kit and in the process of building it! It's going to be an 8S setup, mamba xlx with Poseidon 1700kv! I just wanted to introduce myself and ask for any input at all as far as gearing goes, obviously I'm going to be running at least 1:1 ratio, just wondering if there's any mods necessary to do so and if so what! Also are there any bodies like the Serpent 977e body available for the mgt7? Abby info would be greatly appreciated! Thanks, Mike
As for bodies, Deltaplastikusa has tons of nice speed run bodies for 1/8 GT cars.
#173
Tech Apprentice
#174
Tech Addict
#175
Tech Adept
Hope you have better luck with the XLX than I did. This esc seems to have been severely detuned in hopes of less failures I'm guessing. Didnt make any power for me. Castle tech support won't even admit anything is wrong or respond to my emails after they told me to send them my data logs.
As for bodies, Deltaplastikusa has tons of nice speed run bodies for 1/8 GT cars.
As for bodies, Deltaplastikusa has tons of nice speed run bodies for 1/8 GT cars.
#176
Tech Apprentice
#177
Tech Apprentice
Hope you have better luck with the XLX than I did. This esc seems to have been severely detuned in hopes of less failures I'm guessing. Didnt make any power for me. Castle tech support won't even admit anything is wrong or respond to my emails after they told me to send them my data logs.
As for bodies, Deltaplastikusa has tons of nice speed run bodies for 1/8 GT cars.
As for bodies, Deltaplastikusa has tons of nice speed run bodies for 1/8 GT cars.
#178
#179
Tech Rookie
The GT2 VE is a solid car. I have had mine up to 126 mph. But I have had major problems with center dogbones/universal shafts popping out and bending during speed runs. It has happened at least 5 to 6 times. Its come to a point that I am afraid to do speed runs because of this issue.
#180
Tech Addict