Will there ever be a 1/8th scale Electric onroad car
#886
#888
Robert
#889
Tech Elite
iTrader: (19)
I don't need those parts. I got the serpent 966e so I came with those bits. But, I am not a fan of having to take the top plate off each time to mount the batteries and not being able to have larger batteries. This is the reason I would rather be able to mount them on the side and mount my electronics down on the chassis so I can have longer run times with the bigger batteries since I will be parking lot racing with buddies.
Robert
Robert
first off used shorty packs, had them nice and central resting at the back next to the rear radio tray support. but then wanted bigger capacity, so made it wider then to house 2 x normal 2S touring packs. i tried batts hanging off the side, its not an ideal situation. still enough room to mount electronics by having your batteries mounted at the back just infront of the radio tray support. makes for a better handling car also.
#891
#895
#896
How many of you guys has fried your ESCīs? i cant seem to ge this working on 6S and 2100kv. have burned One RX8, One Nosram falcon 8 and also one castle monster max with the 2200kv motor. i guess there is a little bit too high ampdraw.
http://www.youtube.com/watch?v=dlzG2kvH73Y
http://www.youtube.com/watch?v=QAoIayRrugI
http://www.youtube.com/watch?v=dlzG2kvH73Y
http://www.youtube.com/watch?v=QAoIayRrugI
#897
Tech Lord
iTrader: (32)
How many of you guys has fried your ESCīs? i cant seem to ge this working on 6S and 2100kv. have burned One RX8, One Nosram falcon 8 and also one castle monster max with the 2200kv motor. i guess there is a little bit too high ampdraw.
http://www.youtube.com/watch?v=dlzG2kvH73Y
http://www.youtube.com/watch?v=QAoIayRrugI
http://www.youtube.com/watch?v=dlzG2kvH73Y
http://www.youtube.com/watch?v=QAoIayRrugI
#899
How many of you guys has fried your ESCīs? i cant seem to ge this working on 6S and 2100kv. have burned One RX8, One Nosram falcon 8 and also one castle monster max with the 2200kv motor. i guess there is a little bit too high ampdraw.
http://www.youtube.com/watch?v=dlzG2kvH73Y
http://www.youtube.com/watch?v=QAoIayRrugI
http://www.youtube.com/watch?v=dlzG2kvH73Y
http://www.youtube.com/watch?v=QAoIayRrugI
But if it was the ESC or the motor, which in return fried the ESC, I will never know.
After the ESC went, I replaced it for a new one, and it immediately broke after switching it on. Turned out to be a damaged sensor board in the motor.
After switching from 6S lipo to 4S, I never had a problem like that again, other problems occure then
As you can see in your first movie in where you drive together with some nitro 8th scale cars, you can see the big disadvantage of driving 6S lipo, mounted next to the car, it handles like crap. The weight is around 500grams more, and hanging on both sides of the car, giving the car to much roll....
My 4S 966e handles almost like his nitro powered bigger brother (I still believe nitro powered is the bigger brother )
But the problem with 4S lipo, is runtime. I have not yet been able to go flat out and reach 5 minutes.
Stories I read here about 8 minutes runtime, might be true on a small track, bur running at the MACH track, a real 8th scale track, like we have a lot in Europe, is a real challenge, atleast, if you also want to have some decent topspeed.....
#900
Thanks for the replies guys.
I didnt feel that my car handled like crap, i was not very used to driving it at that point, when i managed to put the car in correct apex i had almost the same laptime as the nitro guys. if you look at the laps approx 1.50 in the movie i started to get hang of it.
I guess gearing was to high and i have no slipper, but i was told to get two 5S packs and a 1000kv motor to be on the right side with the electronics. weel maybe i will build this one as a speedcar.
I guess 4S is not an option, i want to go fast so next year i will build a 1/10 235mm pan car instead.
I didnt feel that my car handled like crap, i was not very used to driving it at that point, when i managed to put the car in correct apex i had almost the same laptime as the nitro guys. if you look at the laps approx 1.50 in the movie i started to get hang of it.
I guess gearing was to high and i have no slipper, but i was told to get two 5S packs and a 1000kv motor to be on the right side with the electronics. weel maybe i will build this one as a speedcar.
I guess 4S is not an option, i want to go fast so next year i will build a 1/10 235mm pan car instead.