1/10th pan car
Tech Champion
iTrader: (6)
Ive been off the forums for a while but I wanted to say that Im glad to see a new car from Corally. Maybe we'll have a further resurgence of the 2wd F1 and Pro10 classes
Yeah, great to see the resurgence of the 10th scale classes. I have the Pro10 prototype and it's sweeeeet. It's really fun to drive and very stable, too. The F1 prototype is in the hands of one of our team drivers right now and he'll be racing it on Dec 15th against some of the Tamiya F201 boys (no contest!). We're hoping to have the F1 in stock within the next 10 days or so. Our first order for the F1 is already 75% pre-sold! They shipped the prototype car with Yellow rears and Purple fronts which may be a good combo to start out with. We'll see.
This is exciting. We've got close to a a dozen guys locally who are committed to the Pro10 Class. We're trying to get access to a consistent line of bodies for the Pro10, though, and it's a bit of a challenge. I've searched for the Toyota, Jag and Porche, but really can only find the occasional Peugeot and Nissan Coupe. Any other suggestions, guys?
Thanks!
Phil
This is exciting. We've got close to a a dozen guys locally who are committed to the Pro10 Class. We're trying to get access to a consistent line of bodies for the Pro10, though, and it's a bit of a challenge. I've searched for the Toyota, Jag and Porche, but really can only find the occasional Peugeot and Nissan Coupe. Any other suggestions, guys?
Thanks!
Phil
Tech Elite
iTrader: (40)
Some of the bodies have come across this web site, and I'd say I've gotten more than my share of them. If really needed, I have some of the Toyota's that I could send to you.
Question on the Corally, is the chassis set for 235 wide bodies or is set for the narrow 200 bodies??
How soon will the Pro10 car be ready to ship??
Question on the Corally, is the chassis set for 235 wide bodies or is set for the narrow 200 bodies??
How soon will the Pro10 car be ready to ship??
Hi there, Grenade10.
The Prototype is the 235 mm width and not an SS width. The chassis itself is narrower but nice and thick and made from carbon fibre this time and not GRP or Graphite.
For release timing, we have been told that it will likely be before the end of the year. As soon as I have details I will certainly post here.
Re: Bodys, I'll send you a PM now. Thanks for your help.
P.
The Prototype is the 235 mm width and not an SS width. The chassis itself is narrower but nice and thick and made from carbon fibre this time and not GRP or Graphite.
For release timing, we have been told that it will likely be before the end of the year. As soon as I have details I will certainly post here.
Re: Bodys, I'll send you a PM now. Thanks for your help.
P.
Tech Addict
iTrader: (1)
could anyone point me in the direction of a hobby shop that has 1/10 pans.
I am from Australia and looking at running these at our local club.
Thanks Steven
I am from Australia and looking at running these at our local club.
Thanks Steven
Tech Fanatic
iTrader: (2)
Tech Elite
iTrader: (40)
Tech Elite
iTrader: (40)
Hi there, Grenade10.
The Prototype is the 235 mm width and not an SS width. The chassis itself is narrower but nice and thick and made from carbon fibre this time and not GRP or Graphite.
For release timing, we have been told that it will likely be before the end of the year. As soon as I have details I will certainly post here.
Re: Bodys, I'll send you a PM now. Thanks for your help.
P.
The Prototype is the 235 mm width and not an SS width. The chassis itself is narrower but nice and thick and made from carbon fibre this time and not GRP or Graphite.
For release timing, we have been told that it will likely be before the end of the year. As soon as I have details I will certainly post here.
Re: Bodys, I'll send you a PM now. Thanks for your help.
P.
Tech Elite
iTrader: (12)
gary mcalister himself has been on here and said he can pull To-j bodies for us.. all we want. the protoform bodies from stormer are readilly available and if you order in bulk, the bodies from europe are plentiful and still in production
Tech Elite
iTrader: (8)
If you guys can talk Gary into making them, we'll happily stock it.
I'm old school and still like pan cars.
Moderator
iTrader: (1)
Bob, could you be persuaded into ordering Peugeot high downforce bodies from Protoform?
I know Protofrom still has the mold and will make new bodies if someone orders enough.
I know a few people around here that would really want a few!
I know Protofrom still has the mold and will make new bodies if someone orders enough.
I know a few people around here that would really want a few!
Tech Elite
iTrader: (40)
And some do not need to be shipped across and ocean!
Tech Elite
iTrader: (12)
Tech Elite
iTrader: (8)