1/10th pan car
good to see this is still going.
Tech Champion
iTrader: (21)
Did anyone try the two different inserts that you can put in the L2 damperdisc topplate? Just curious how that tuning option will work out in practice. You will get more steering in hard cornering but will that be too erratic as a tuning option. I will probably not use it but i am just wondering.
Thought so. Thanks for making it sure
btw i screwed a very long steel screw through the post, almost as long as the post itself to make the post a little more sturdy. I already imagined the post would break off easy with a short screw.
What does this special steering setup do for the handling of the car comparing with the other option?
I saw from the pictures you and Mark Burt you both did use this setup even when one of you is using an angled servo and the other one is using a flat servo.
I even never tried a flat servo in any of my pancars.
Tech Champion
iTrader: (6)
Tech Champion
iTrader: (21)
You can also try to find an old aluminum center post from the 10L/LS era if you're worried about breaking the composite one.
Tech Elite
iTrader: (40)
We have free tire rules but usually I´m running spec tires also. They just work the best for me.
What does this special steering setup do for the handling of the car comparing with the other option?
I saw from the pictures you and Mark Burt you both did use this setup even when one of you is using an angled servo and the other one is using a flat servo.
I even never tried a flat servo in any of my pancars.
What does this special steering setup do for the handling of the car comparing with the other option?
I saw from the pictures you and Mark Burt you both did use this setup even when one of you is using an angled servo and the other one is using a flat servo.
I even never tried a flat servo in any of my pancars.
Did someone have contact with Doug Powell? I made an order for some parts but it is rather quiet. It has been some time ago.
Doug, if you read this, please make contact as i am waiting for the parts. A message with a timeframe when the parts will be made is ok too.
Doug, if you read this, please make contact as i am waiting for the parts. A message with a timeframe when the parts will be made is ok too.
Did you try sending him a pm?
yup since 10 januar no anwser with multple pm's. I just have send him an e-mail instead. It seems i am not the only one, looking at someone that started a thread on this same section asking for info.
Tech Rookie
pan Car RC-car history
New History Web Page for Pan Cars
www . Pro10-classic . com
Sascha
www . Pro10-classic . com
Sascha
Tech Fanatic
iTrader: (1)
Tech Master
iTrader: (5)
Re...Pro10 site
Ok, How do I get the english version????? I can't find the "EN" on the page!!!
Tech Champion
iTrader: (6)
CLick the Union Jack in the upper left corner
BENELUX+ Race 23-24 Juli 2011
For those in Europe (or if you are going for a holliday to the Netherlands )there is going to be a Benelux+ race held on the 23 and 24 juli 2011 on the beautiful and highspeed track of the Baanbrekers in Rucphen, The Netherlands.
Benelux+ means BElgien, NEtherlands and LUXemburg and the + is the rest of europe .
Website:http://www.macdebaanbrekers.nl/index.html
To register: http://www.macdebaanbrekers.nl/beneluxraces_eng.html
Circuit: http://www.macdebaanbrekers.nl/hetcircuit.html
Benelux+ means BElgien, NEtherlands and LUXemburg and the + is the rest of europe .
Website:http://www.macdebaanbrekers.nl/index.html
To register: http://www.macdebaanbrekers.nl/beneluxraces_eng.html
Circuit: http://www.macdebaanbrekers.nl/hetcircuit.html
Last edited by 2wdrive; 03-01-2011 at 12:31 PM.