LRP nitro motors
#181
Originally Posted by stefan
Picco or Mega 2607 with a short conucal header = awesome!
Just wondering because Uriah and several others recommend it with the JLR red dot, which is basically the same Picco based engine.
AFM
#182
Originally Posted by afm
Have you had a chance to compare them with the Skyline VR 12 Plus ??
Just wondering because Uriah and several others recommend it with the JLR red dot, which is basically the same Picco based engine.
AFM
Just wondering because Uriah and several others recommend it with the JLR red dot, which is basically the same Picco based engine.
AFM
But if you follow Uriah's advice you won 't be dissapointed.
#183
Originally Posted by stefan
Skyline pipes are unfortunately not Efra approved so we can't run them over here.
But if you follow Uriah's advice you won 't be dissapointed.
But if you follow Uriah's advice you won 't be dissapointed.
AFM
#185
LRP Spec 3 fuel
Can you guys tell me the perferred fuel for this engine, O'Donnell and Byrons are available in my area.
I would like to choose the best for the engine?
thanks
I would like to choose the best for the engine?
thanks
#186
Originally Posted by jelayne
Can you guys tell me the perferred fuel for this engine, O'Donnell and Byrons are available in my area.
I would like to choose the best for the engine?
thanks
I would like to choose the best for the engine?
thanks
Byron fuel 16%,head shims 0.4 to 0.45mm max temp 110 to 115c,plug no 7 and sirio pipe.All this work better for me at the moment.
#187
Thanks I will try some 25% Byrons
#188
Spec 3
I recently got a Spec 3 but I would like to use 25% Byrons, can you tell me if I would need to add the extra shims provided with the engine, or can I just add fuel and #8 plug and I should be good?
Thanks for any heads up
Thanks for any heads up
#189
Originally Posted by jelayne
I recently got a Spec 3 but I would like to use 25% Byrons, can you tell me if I would need to add the extra shims provided with the engine, or can I just add fuel and #8 plug and I should be good?
Thanks for any heads up
Thanks for any heads up
#190
Originally Posted by afiq
U can go for 0.45 to 0.5 mm head shims for 25 % fuel,plug no 7 or no 8 will do but have to monitor on your low end needle setup not to lean. what car are u running?
#192
Originally Posted by infinique
Hi Afiq, I just got my Spec III from HPC, any idea how would Mega Pipe #2602 run on Spec III? Would you recommend Sirio over others for Spec III, still never break in yet, awaiting for your recommendation. Thanks man.
Regards,
PMW
Regards,
PMW
#194
Can anyone confirm for me that the LRP plugs are in fact picco plugs? thanks!
#195
Tech Champion
iTrader: (34)
Originally Posted by German Muscle
the Z12R is a good motor as it is picco.
The rest of the LRP linup is SH which are junky motors
The rest of the LRP linup is SH which are junky motors