We all miss you Vaughn.

I spoke with the USA novarossi importer and he said the new .12 engines are ordered.

Damn, Vaughn still pulling that crap even out in Vegas huh. :lol: :lol: :lol:

P.S. When will you be back in NY?

Still on back order :p If the engine result is good why not, but I prefer the GRP Boss coz its blue ;) Still hoping that Novarossi will come back to the business.

Hey, they are the same engines :smile:

Call me if GRP engines are better than OS TZ.

head shims for 321p
 

I am trying to figure the proper thickness of head shims on my 321p. I run 30%, usually a 7tf, and I am located pretty close to sea level(Texas) usually with moderate to high humidity. The motor has the head button that has 3 dots arranged in a triangle. Any help would be greatly appreciated. Nate

Try a total of .70 mm to .80mm total shims under the head. This should be a good starting point.

Thanks! Nate

it has, and it's much faster then a 2006 pipe!

yep.
i've raced the Plus 3C and the new 35 PLUS 21, the 35 plus is much faster.
the 35 has far more power from low rpm then the plus 3C.

IMO the plus 3C is easyer to drive, but the fastest.
i've heard that the first 3C's had some problems with disintregrating pistons but it never occurd with my engines. :)

I know this is a longshot, but would anyone know where I could get parts for an RX-21 SP? The rod in this motor let go, so I put it away years ago, and was considering rebuilding it so I could use it as a practice motor for the 950 I built and never ran. Tried Fusion already.....looking for the p/s, rod, and head button :)

Contact Ed (Palmaris Racing). The 21 BRB set will fit in.

I'll do that....thanks! :)

Does anyone know the stock setting for the 2 needle carb that comes on the rex rer 12? Thanks.

usually 4.5~5 turns on HSN
2.5~3turns on LSN

Returning To Onroad Nitro
 

Dusted off my nitro last night. Need glo plug 101 guys. What would be a good range of plugs to have for racing in midwest (kansas) for a novarossi ns3? thanks for your help.