R/C Tech Forums
Page 15 of 193
« First
5
13
14
15
16
17
25
65
115
Last »
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   FUSION X ENGINES THREAD (https://www.rctech.net/forum/offroad-nitro-engine-forum/490156-fusion-x-engines-thread.html)

kgombe 04-25-2011 08:23 PM
so it was processed at some post office in richmond today... hopefully it left on a plane and will be here tomorrow and prolly delivered on Wednesday...

houston 04-25-2011 08:25 PM
Originally Posted by kgombe (Post 9018949)
so it was processed at some post office in richmond today... hopefully it left on a plane and will be here tomorrow and prolly delivered on Wednesday...
What?

kgombe 04-25-2011 08:28 PM
Originally Posted by houston (Post 9018961)
What?
left customs and was processed at a post office in richmond... somewhere on the west coast of canada...

not richmond, VA

hambone 04-25-2011 08:34 PM
I'll be helping the track owner this sat with his new X7 Extreme. I'll pm you a full report sun Monty. Lol. 6.5 insert for buggy? I'm going at least 7. It's a real fast track.

kgombe 04-25-2011 08:35 PM
what track is that rob

houston 04-25-2011 10:24 PM
Originally Posted by hambone (Post 9019021)
I'll be helping the track owner this sat with his new X7 Extreme. I'll pm you a full report sun Monty. Lol. 6.5 insert for buggy? I'm going at least 7. It's a real fast track.
track owner ? which track?


i would use an 8mm for break in of about 1/2 gallon at least then probably down to a 7 or so , use 9901ss/41021 , bearing? :D

houston 04-25-2011 10:26 PM
Originally Posted by kgombe (Post 9018985)
left customs and was processed at a post office in richmond... somewhere on the west coast of canada...

not richmond, VA
oh , i was a little befoggled thinking Richmond,VA :confused::lol:


you live on the east side of the continent right? somewhere close to Neal? ;)

hambone 04-25-2011 10:36 PM
Originally Posted by houston (Post 9019481)
track owner ? which track?


i would use an 8mm for break in of about 1/2 gallon at least then probably down to a 7 or so , use 9901ss/41021 , bearing? :D
Owner of LCRC. He broke it in on a bench. It has 1 practice day on it. Says it runs real good. He is using that pipe/manifold. Can't choke an 8 port down with 6.5!

Jaz240 04-25-2011 10:45 PM
Really looking forward to your input Rob.

hambone 04-25-2011 10:56 PM
Originally Posted by Jaz240 (Post 9019547)
Really looking forward to your input Rob.
James, are you yanking my chain good buddy? If it's kickin good i'll be the 1st to say it. I like engines.

houston 04-25-2011 11:00 PM
Originally Posted by hambone (Post 9019506)
Owner of LCRC. He broke it in on a bench. It has 1 practice day on it. Says it runs real good. He is using that pipe/manifold. Can't choke an 8 port down with 6.5!
IT IS NOT THE SAME AS THE 8 PORT!!!!!

i fyou get to drive it you will see :nod:

houston 04-25-2011 11:01 PM
Originally Posted by hambone (Post 9019579)
James, are you yanking my chain good buddy? If it's kickin good i'll be the 1st to say it. I like engines.
he is always yakin chain and smokin pole!!! :weird::lol: sorry James , couldnt help it :lol:


rc car engines are cool :nod:

hambone 04-26-2011 01:28 AM
Originally Posted by houston (Post 9019599)
IT IS NOT THE SAME AS THE 8 PORT!!!!!

i fyou get to drive it you will see :nod:
My 3rd shift mistake....7 port i mean. I'll drive it.

kgombe 04-26-2011 05:33 AM
Originally Posted by houston (Post 9019486)
oh , i was a little befoggled thinking Richmond,VA :confused::lol:


you live on the east side of the continent right? somewhere close to Neal? ;)
nowhere close.... im in Toronto... he's in Winnipeg i think.. i'm planning on going to the rcpro finals that they are having up there.. but i will have to see how the funds play out...

kgombe 04-27-2011 06:15 AM
ahhh.. some progress on my package.. its in my neck of the woods now... just a matter of time.. either today or tomorrow... but with this rainy weather..i may not get it done by sunday


All times are GMT -7. It is currently 05:44 PM.
Page 15 of 193
« First
5
13
14
15
16
17
25
65
115
Last »
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.