I also run OD97T, but use 25% NEO+ fuel. Found the plug to be a good allrounder, in hot,humid or dry weather. We had a very long wet season this year, January till end of April, the boys were having withdrawl symtems. Now it is the complete opposite, NO rain for 4 months, hot dry and very dusty. Keeps your tuning skills up;) Because our temperature range is usually between 12 and 35 degrees, mostly above 22, we have fairly consistent tuning patterns. Have just aquired a GODZILLA motor, (STD version),Man aren't they something else.:eek:
!!

Havn't seem any of those over here yet, saw flannos 25 at the femca truggy, that had some mean power.
Is Mark still sticking with modifying GO motors?..whats happening with the italian motors he was switching to, I here the techno power power brand is closing down, was that the brand he was going to modify.

Don't know about the Italian motors, but the Godzilla I have is a modified GO engine, standard rod, improved and lightened crank and different port timing. The others in the Godzilla Range are step-ups from there: ie different rod,bearings etc.I am sure Flanno posted a speal about them in RCTECH, either in this form or the GODZILLA , Massive Mods thread. Well worth a read:nod:
Memory Flash, it is on the Offical Massive Mods GODZILLA Forum on RCTECH

Hello everybody,

I'm looking to buy a new engine to run in the championships next year.

Currently has a WS9 and a NOVA Plus4.

I want to know more about this new model of GO.

For I am in doubt between three engines. RB B11, Werks B6 and GO GXII.

I like a good engine on all tracks, but smooth.

This new GXII which is near the engine, NOVA Plus4?


Sorry my bad English!

Gx11
 

Hi Diegoli, The Gx11 are a smooth and easy motor to work with,The power delivery is a good all-round performance. I have a Nova Plus 4 as well, and the power is about the same, run time is similar, Be sure to run the GO 2072 Matched pipe if you want the best balance of power and tank run time . I have found the motor to be good value for money. Hope this helps.:)

Thanks for any information!!!

I got a RB Mods GX-3R in need of a con-rod. Anyone know where I can buy one. Nitronorth seems to be out of stock online, but havn't called them yet. Any other ideas?

I have them in stock. Does the webstore really show them as out of stock?
#21-0600

[email protected]

Yea when you put one in the cart. It loads the shopping cart and says "The Connecting Rod is not currently available. Please contact us for availability of this item."

But that is awesome that you have them I'll be getting one or two. I'll give you a call after I get off work.

i'll warn ya troy, moto is a little hard of hearing....and likes to talk, ALOT!!! :lol::lol: thanks to him and our other racing comrad ken, i have more useless knowledge bouncing around in my head than any 10 people would ever need..;)

Me? :confused: http://i1128.photobucket.com/albums/...n_JR/w00t1.gif:confused: .................No Way!! :lol: :lol: :lol:

You'll use that knowledge someday young whippersnapper! :nod:

:D Ahh yes. It's only useless because you haven't needed to use it yet ;)
Knowledge is power, and there is no denying that :cool:

:lol::lol:
just want to wish good luck to all the GO driver racing at the Waikato champs this weekend :D a very good showing for the brand at this meet, of the 91 nitro cars racing 35 are running GO engines :cool: the results and pics etc of the meet can be found on the rcracer nz forum.

http://www.rcracer.co.nz/Forum/viewt...hp?f=18&t=5654

Parts ordered. Thanks again, moto. And has anyone had problems with the TiN coating? I don't think my crank has any. But it doesn't seem to be worn.

Parts shipped today Troy. Friggin USPS, I couldn't print a shipping label at PayPal, so I had to run into town and have the postal clerk do it. Grrrrrrrrrrrrrr.

The GX coated parts have been very durable. The ONLY crank I saw with the coating worn.....................had the air filter fall of on a very dusty day.