R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Clockwork Racing Engines and Products... (https://www.rctech.net/forum/offroad-nitro-engine-forum/414826-clockwork-racing-engines-products.html)

NitroLuver 10-26-2011 08:53 PM


Originally Posted by Maximo (Post 9834160)
its a nice punchy engine...ideal for smaller tracks where you need lots of low speed snap and control

so really aggressive on the bottom and not much top? correct

Maximo 10-26-2011 09:06 PM


Originally Posted by NitroLuver (Post 9834312)
so really aggressive on the bottom and not much top? correct

Its actually not aggressive at all....Its just the powerband comes in at a very low RPM...which gives it extremely good low speed throttle modulation....... Which can be very good on a smaller technical track where your ground speed is limited and you need to have strong low speed punch and control...SOme of the bigger HP engines don't like being run at slow speeds, they can get mushy and or start feeling like a light switch......This B2 is going to be a very good engine for a technical track where you need lots of tractable bottom end........

xc7 10-26-2011 09:09 PM


Originally Posted by Maximo (Post 9834163)
I am trying !!!! but no matter how hard I try I never seem to be caught up....I am soo dying to get into the new shop !

don't you have leaves to rake?:sneaky:

rider313 10-27-2011 01:07 PM


Originally Posted by Maximo (Post 9834163)
I am trying !!!! but no matter how hard I try I never seem to be caught up....I am soo dying to get into the new shop !

Nick was telling me about your new shop. Sounds killer! He also reminded himself when move time comes hauling the mill out of your basement. :lol: he didn't seem to excited about that.

Maximo 10-27-2011 01:51 PM


Originally Posted by rider313 (Post 9836794)
Nick was telling me about your new shop. Sounds killer! He also reminded himself when move time comes hauling the mill out of your basement. :lol: he didn't seem to excited about that.

LOL... Nope.... mill was not fun to move downstairs......Tho I must say Nick is a wiry bugger and much stronger then he looks when it comes to lifting.... I think in his family business he moves fridges and other heavy pieces almost on daily basis...

J.Whiting 10-27-2011 05:19 PM

it was nice meeting nice last weekend.. he was a very friendly guy.. he was even nice when i lapped him:D!! his motor ran very well all weekend long.. you do some good work up north there... nick should be chatting with you about last weekend's race.. jeremy

Maximo 10-27-2011 06:09 PM

Here is a sneak peak at my Clocked B2.... Engine is still fresh, but already starting to run really nice...I am running 3.8 Badlands and this engine has no issue pulling them...... All around a very solid feeling engine, especially for the price...

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

aptyk88 10-27-2011 06:14 PM

that thing would be awesome with a 2013

Maximo 10-27-2011 06:24 PM


Originally Posted by aptyk88 (Post 9837925)
that thing would be awesome with a 2013

It sure would be.... even with the 2058 it was slinging those MT tires really well, a 2013 would give it a big kick in the bottom end....

CompetitionHeat 10-27-2011 06:47 PM


Originally Posted by Maximo (Post 9837910)
Here is a sneak peak at my Clocked B2.... Engine is still fresh, but already starting to run really nice...I am running 3.8 Badlands and this engine has no issue pulling them...... All around a very solid feeling engine, especially for the price...

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

Impressive little 3 port Neal... I bet your neighbors love you :lol:

hookem34 10-27-2011 07:00 PM

New Ninja
 
Neal when will he mod Ninja be available?

Jaz240 10-27-2011 07:05 PM


Originally Posted by Maximo (Post 9837910)
Here is a sneak peak at my Clocked B2.... Engine is still fresh, but already starting to run really nice...I am running 3.8 Badlands and this engine has no issue pulling them...... All around a very solid feeling engine, especially for the price...

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

your making it very difficult for me!! decisions, decisions!!! :cry:

abqNitro 10-27-2011 07:36 PM


Originally Posted by Maximo (Post 9837910)
Here is a sneak peak at my Clocked B2.... Engine is still fresh, but already starting to run really nice...I am running 3.8 Badlands and this engine has no issue pulling them...... All around a very solid feeling engine, especially for the price...

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

That would have been the perfect engine for the track I just raced on in Lubbock Texas last weekend! Small and technical track, that B2 would of really shined there...

Muggydude 10-27-2011 09:41 PM

Neal- have you had a chance to compare the nova 2096 pipe to the werks 2013?

Maximo 10-27-2011 09:47 PM


Originally Posted by Muggydude (Post 9838692)
Neal- have you had a chance to compare the nova 2096 pipe to the werks 2013?

2013 is much more agressive ..but the 2096 is really nice as well.....Just depends on what engine it is on...


All times are GMT -7. It is currently 12:08 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.