RcRenew.com engine resizing and epoxy crank re-filling
#1621
Joined: May 2005
Posts: 5,174
From: a very small town in wisconsin that is in the middle of absolutely no where
#1622
Tech Regular
iTrader: (7)
Joined: Apr 2011
Posts: 480
From: Rockhampton.Qld Australia
Ran the A852 that Lance freshend up and modded. Loved the stock engine but the modded version is a whole lot more. Ran it in a truggy over the weekend when my .23 played up. Engine pulls as hard but a bit smoother off the bottom than the stock through to stupid fast top. Running against a mate with the same truggy with almost the same set up who is running the A352 we ran within half a second of each other all weekend. I ended up P3 and he was P4 in the A final. Going by the fuel used at each stop measured through a fuel gun this is a easy 10+ minute engine at full race pace.
Dave
Dave
#1623
Ran the A852 that Lance freshend up and modded. Loved the stock engine but the modded version is a whole lot more. Ran it in a truggy over the weekend when my .23 played up. Engine pulls as hard but a bit smoother off the bottom than the stock through to stupid fast top. Running against a mate with the same truggy with almost the same set up who is running the A352 we ran within half a second of each other all weekend. I ended up P3 and he was P4 in the A final. Going by the fuel used at each stop measured through a fuel gun this is a easy 10+ minute engine at full race pace.
Dave
Dave
#1628
Chris your engines have been Modded and Lapped and have shipped out.
Bobby I was able to repair the overly pinched sleeve on the Novarossi for you. The charge is the same to repair as a standard resizing. Sent your invoice.
Check your email for tracking and info.
Thanks guys,
Lance
Bobby I was able to repair the overly pinched sleeve on the Novarossi for you. The charge is the same to repair as a standard resizing. Sent your invoice.
Check your email for tracking and info.
Thanks guys,
Lance
#1629
Joined: May 2005
Posts: 5,174
From: a very small town in wisconsin that is in the middle of absolutely no where
spring is just around the corner.. get all your motors and mods done soon... dont wait till the last minute and have lance working 24-7 to get you race ready..
#1630
#1632
Joined: May 2005
Posts: 5,174
From: a very small town in wisconsin that is in the middle of absolutely no where
#1634



3Likes