Originally Posted by teamlosi906 (Post 6805859)

just a few questions i have a p5xs nova for my 8t 2.0 losi truggy and a 9853 pipe is this motor anything close in power to say the plus 21-4 or p5xlt motor we run on a good size clay track med to large just debating what to use i havent tried it out yet any help thanks :tire::tire::confused:

Originally Posted by PowerHouse (Post 6802705)

Mark I dont know if your aware but Novarossi advise against useing WD-40 in their motors. If you go on their web site and go to faq at the bottom of the page and then go to 13th item down the list entitled, What is after run oil & how do i use it. They advise not to put WD-40 or oils containing silicon in their motors. I know WD-40 is silicon free but perhaps their are other things in it not suitable for motors. Or is it Nova wanting you to buy their oils. Martin

Originally Posted by martinh (Post 6805323)

rbmods after run oil is the best !!! rick is an awesome guy and is a frickin genius in the nitro rc world !!! his products are second to none and his modificatons , well lets just say they are vvveerrryyy very fast ;)

happy motorin',
monty

Originally Posted by teamlosi906 (Post 6805859)

just a few questions i have a p5xs nova for my 8t 2.0 losi truggy and a 9853 pipe is this motor anything close in power to say the plus 21-4 or p5xlt motor we run on a good size clay track med to large just debating what to use i havent tried it out yet any help thanks :tire::tire::confused:

Originally Posted by houston (Post 6805513)

wd-40 will break down the silicone ramp filler in the cranks and also eat the seal on the front bearing. i have tested and seen many things happen to engines and i say and recommend what i do based on actual experiences and not hearsay . ;)

i am not "sponsored" per say by the people/companies that i recommend , i just promote good quality products and if i find a flaw in the product i will see what it takes to fix it unless it lets me down during a race over and over even after i had tried to fix. :mad::lol:


rbmods after run oil is the best !!! rick is an awesome guy and is a frickin genius in the nitro rc world !!! his products are second to none and his modificatons , well lets just say they are vvveerrryyy very fast ;)

happy motorin',
monty

Originally Posted by houston (Post 6806245)

once again :rolleyes::lol:

there is no real difference in design whatsoever between the p5xs and xl , the T just means it has a turbo head button.


and yes the p5 is awesome :nod:

Originally Posted by martinh (Post 6806165)

I know Mark was only talking about soaking the shaft in WD-40 to see any reaction it has. The point i was making is that a lot of users put WD-40 in their motors and an awefull lot dont know that Novarossi advise agaist this. I suspect that their are a lot of users that are not aware that Novarossi have said this on their web site. Martin.

Originally Posted by zixxer (Post 6806398)

are you tired yet :lol:..i mean my man you are holding down every novarossi thread on this site ...this right here is a deticated man ...thanks for answering all the questions you answer :nod:everytime i need an answer on novarossi period ..i just use that little search bar up there on any thread you are on ....and have learned a ton ...thanks again for all you do ;)



yeh i see that now after this post ..your other post wasnt quite as clear on what you were actually saying ....:deathstar you are right alot of users dont know a whole lot :tire:

Originally Posted by losi_racer (Post 6806508)

MONTY!!!!!!


My dads toro nero, The oring under the head button, it ripped. some how i dont know, you were the last to take it off and i doubt you did anything wrong. He wants to replace the o ring but i cant find it anywhere for a part number or to order it. Can you help me

Originally Posted by losi_racer (Post 6806508)

MONTY!!!!!!


My dads toro nero, The oring under the head button, it ripped. some how i dont know, you were the last to take it off and i doubt you did anything wrong. He wants to replace the o ring but i cant find it anywhere for a part number or to order it. Can you help me

Originally Posted by houston (Post 6806500)

i told ya i promote quality products ;)

i am also not working but getting paid for it for another month or so as i severely sprained my ankle and ripped the cartilage up inside of the ankle and they had to perform a microfracture surgery on it . so needless to say i have been filling my time with engine work and rctech :D

Originally Posted by zixxer (Post 6806562)

hope you get better soon ...and i ment what i said about you helping out ..thanks agin for all that good info :nod:

Originally Posted by ABURTON (Post 6806590)

Brian,

I was finishing up some break in's tonight on the benches at the speed shop, I took one apart to check if the GRP engine tooling kit will work...

Your good to go without purchasing the Novarossi tool.

See ya soon

AB