R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   NOVAROSSI Engine thread.... (https://www.rctech.net/forum/offroad-nitro-engine-forum/353301-novarossi-engine-thread.html)

mourinho 12-19-2016 03:35 PM


Originally Posted by HaulinBass (Post 14773255)
The mito have a 14.5mm crank like the keep off 7 and virtus. Noone else makes that bearing cheapest I have found for a replacement ceramic for it is about 70us

you sure?
http://tkocompetitiondev.com/product...-woffset-race/

HaulinBass 12-19-2016 03:48 PM

thats the replacement for 16002

kgombe 12-19-2016 06:56 PM


Originally Posted by HaulinBass (Post 14773281)
thats the replacement for 16002

I'm pretty sure that the bearing that is posted in the link is the one you're looking for...

DrNitro 12-20-2016 02:40 AM


I'm pretty sure that the bearing that is posted in the link is the one you're looking for...
No that's the wrong bearing. For MITO4 you need a bearing with following dimensions:
Ø14,5x26x5,7x4,7mm - 11 balls

Will be hard to find a replacement.
Original NOVA numbers are:
16009 for steel bearing
16006 for ceramic bearing

cczjordan 12-20-2016 04:28 AM


Originally Posted by HaulinBass (Post 14773255)
The mito have a 14.5mm crank like the keep off 7 and virtus. Noone else makes that bearing cheapest I have found for a replacement ceramic for it is about 70us

Sorry, same as keep off 7,mito = virtus + keepoff technology

rick oxley 12-20-2016 12:26 PM

warning to anyone runing novarossi engines seems there are some bad conrods
out there
after runing novarossi and novarossi based engines for nearly 20 years i had
my first new con rod fail and novarossi decided they do not warrantry replacment rods or the damage they cause to your engine.

1/8 IC Fan 12-20-2016 01:08 PM


Originally Posted by rick oxley (Post 14774344)
warning to anyone runing novarossi engines seems there are some bad conrods
out there
after runing novarossi and novarossi based engines for nearly 20 years i had
my first new con rod fail and novarossi decided they do not warrantry replacment rods or the damage they cause to your engine.

Any further link to this happening on others engines, or forums? What motor, how many gallons? Been running Nova based motors in On-road since around the time Serpent had the Nova/Mega 21's and TX15 and knock on wood, no conrod failures here. Offroad I have only run the P5XLT and a P3XS, Strange.

HaulinBass 12-20-2016 02:31 PM


Originally Posted by rick oxley (Post 14774344)
warning to anyone runing novarossi engines seems there are some bad conrods
out there
after runing novarossi and novarossi based engines for nearly 20 years i had
my first new con rod fail and novarossi decided they do not warrantry replacment rods or the damage they cause to your engine.

Please post up the engine model and batch and year from the case if possible.

Roelof 12-20-2016 02:40 PM

His story in the Nova onroad topic:

http://www.rctech.net/forum/14774327-post5191.html

cczjordan 12-20-2016 06:20 PM


Originally Posted by Roelof (Post 14774478)
His story in the Nova onroad topic:

http://www.rctech.net/forum/14774327-post5191.html

Kinda funny, after 3 months of used. Within that period, anything can happened

Roelof 12-21-2016 04:53 AM


Originally Posted by cczjordan (Post 14774682)
Kinda funny, after 3 months of used. Within that period, anything can happened

If I am right he just placed a new rod. Not sure which one he have placed, this motor comes with a lighter new designed R4 rod which I do find it tricky. When a replace is needed I do replace them with the rock solid R7

rick oxley 12-21-2016 10:20 AM

the engine was a mito 35 on road engine had just about been fully broken in
and was in exellent condition when the r7 rod was replaced to keep the engine
reliable. the new r7 rod bush failed on the 5th tank of fuel.

rick oxley 12-21-2016 10:25 AM


Originally Posted by cczjordan (Post 14774682)
Kinda funny, after 3 months of used. Within that period, anything can happened

not 3 months of use, novarossi have had my returned engine for 3 months
before looking at it.

rick oxley 12-21-2016 10:38 AM


Originally Posted by HaulinBass (Post 14774465)
Please post up the engine model and batch and year from the case if possible.

the replacement r7 rod was purchased from my countrys distributor
in the first shipment novarossi sent out after there summer break

Roelof 12-21-2016 10:41 AM

On the R7 rod there is also a number engraved, I believe the latest is around 15 or 16.


All times are GMT -7. It is currently 12:31 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.