|
........
|
Originally Posted by houston
(Post 7201376)
We should have em early next week along with p5xlt "factory tuned" and more n21r limiteds
hopefully soon , we weren't exactly sure ofwhat we were getting from novarossi |
And the difference between the two P5's is what O'great one? Different bearings? Worked cam? Different carb?
Do you have the T's in your hot lil hands? I sent you my engine for a going over and I also sent you an email. |
Originally Posted by marccaracer
(Post 7212138)
And the difference between the two P5's is what O'great one? Different bearings? Worked cam? Different carb?
Do you have the T's in your hot lil hands? I sent you my engine for a going over and I also sent you an email. I do know how to make em tuned though ;) |
novarossi n21bf limited (2009) after not being able to find the 07001 or 07009 conrod i am now looking for other conrods that will work with this engine.
anyone know of any other novarossi or other make conrods that will work with this engine? i remember reading somewhere about a Go conrod working with certain novarossi mills. |
Has anyone run a Murnan Modified Toro Nero?
was it worth it |
Outside of the lower CG head and CNC piston is there any difference between the Plus 4c and Plus 4cTeam? Thanks.
|
So I was going through my mills yesterday and found one that my buddy had given me it is a nova 821 so I put a grp carb on it and took it outside and tuned on it for a few minutes and all I can say is OMG that is one bad ass mill. I couldn't believe the power this thing had it absulotley rips. does anybody no much about this motor.
|
Originally Posted by looper
(Post 7214606)
novarossi n21bf limited (2009) after not being able to find the 07001 or 07009 conrod i am now looking for other conrods that will work with this engine.
anyone know of any other novarossi or other make conrods that will work with this engine? i remember reading somewhere about a Go conrod working with certain novarossi mills.
Originally Posted by daswarre
(Post 7214879)
Outside of the lower CG head and CNC piston is there any difference between the Plus 4c and Plus 4cTeam? Thanks.
Originally Posted by J.Sears
(Post 7215084)
So I was going through my mills yesterday and found one that my buddy had given me it is a nova 821 so I put a grp carb on it and took it outside and tuned on it for a few minutes and all I can say is OMG that is one bad ass mill. I couldn't believe the power this thing had it absulotley rips. does anybody no much about this motor.
ntw , why a GRP carb:confused: |
Originally Posted by houston
(Post 7217600)
i have 07009 in stock if you need one R7 rod
:D no comment :D 821 b should have stayed in the line up IMO but oh well , it is an all out BADA$$ engine for sure !! ntw , why a GRP carb:confused: |
Originally Posted by J.Sears
(Post 7222206)
it didn't come with a carb so i used what I had. What's wrong with the grp carb it seem's to work really well. Do they still make p/r/s for this motor? I know the 07009 rod will work but what about the rest?
|
viva la novarossi!!
|
Hey Monty I was wondering if I send you my 821b can you make it new again and mod it for me? I'm also going to buy the new p5xlt and have you mod it too. What would all this cost me?
|
viva la novarossi!!:D
|
Im new to the novarossi thread but have a question. I have a plus 21-4c on the way and was going to use a werks 2013 pipe. I know the novarossi pipe is better for this motor but that will have to come later. Would the 086 ofna pipe work better? Thanks in advance
|
| All times are GMT -7. It is currently 12:30 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.