js engine
 

how much for a js racing that has the full mod done ?

thanks

pricing still isn't set in stone, but look for the Full Mod engine to hit the street around $375. This will be a Fully Modified Broken-In ready to go engine with EBMods heat sink.

Ed how will this engine compare with the ninja jx .21

http://ebmods.com/jx%20vs%20JS.jpg

This is Stock engine vs Stock engine with the same EBMods 30% Race Fuel

Here's a graph of the OS Speed 2 and JX. Both are stock, 2060 pipes, 30% EBMods Race Fuel.

http://www.ebmods.com/JX%20vs%20Speed.JPG

What pipe are you using with the graph on the JS engine? It looks very comparable to the JX21 chart you have.

JS is graphed with 9886 pipe and 086 pipe that's two graphs of the JS...

The JX graph is the Ninja 2042 pipe.

This season i have ran 2 engines
1) EBJX
2) stock JS

I can say the stock JS has more power and throttle response than i ever got out of any OS, and the JS is box stock.

I can speak for ed's work it is top notch. I dont see it as hype at all. Ed could have had the engine out earlier but he will not settle for anything less than perfect. I have ran many of his motors and they are all top notch. I cant wait for this one, but i am happy to as long as it is up to ed's standards, than i will know it is the best. You guys will be very happy with anything that ed puts his stamp on, this engine will be no exception, with the countless hours he has put in on refining this motor, it should be the best that he has come up with. So hype or no hype i and many other will continue to talk about this beast that is coming out. Cant wait:):):)

Ditto to what Joe said above. I, too, ran the same engines this season. I only ran the JS for one race before giving it back to Ed. That race was the Pro Series event at Blue Diamond raceway this past summer. I was able to match Billy Fischer's pace in qualifying and he only hot lapped me by .05, which for me being a touring car guy... I was happy as hell with that. :nod: I blew out in the main though... go figure. :lol: The engine is smoooooth, powerful, and fuel efficient.

Granted, the engine I ran was one of the first 3 pre-production units Ed had. They had a few issues Ed found for the factory to resolve, hence the wait for things to get completed for true production. Testing makes perfect folks. :nod:

I can't wait to get my finished production unit. :D

Thanks Ed I will take two can I pre order through your website and by the way you do great work I had one of your modded extech engine and was very happy with it

If im not mistaken JS racing is a Malaysian Company and a Malaysian is responsible for some or not all of the original design of the engine :D:D:D

Correct me if im wrong :sneaky:

would somebody put the JS engine against a GO engine and post the result :D
I would like to see if the power band are similar:sneaky::sneaky:

Iv been running for EB Mods for a couple of months now. He is great to deal with and a incredible Modder. He modded a stock Go Tech into the best motor I'v ever ran. I used to complain about not having power, Since he modded them they have all the power I need on any track and surface. EB Mods will be seeing alot of me from now on. Thanks Ed for the great work on my Engines.

Matt Farris

I saw these motors run all season with Matt while i was running stock Go's. Matt's EB Mods Go motor's where BALLISTIC. I plan on getting Ed's motors this season. The quality that i saw in the modded motors was just amazing. Can't wait till I can come up with some money to order motors for next season!