EB Mods JS Engine
#1576
Congratulations Chris..... That's freaking AWESOME!!!
Guys Chris also told me he was able to go 13 minutes per tank. So in the 20 minute main he only pitted once.
Chris runs the EBMods JS Race Prepped .21 engine and Nitrotane 30% Fuel
Guys Chris also told me he was able to go 13 minutes per tank. So in the 20 minute main he only pitted once.
Chris runs the EBMods JS Race Prepped .21 engine and Nitrotane 30% Fuel
#1578
My engines showed up today!!!!!!!!!! I can't wait to get them mounted up and start them up!!!!!

I love it when the UPS guy brings stuff to me!!

I love it when the UPS guy brings stuff to me!!
Last edited by ehames005; 01-13-2011 at 07:54 AM.
#1579
As Ed said I worked out my mileage to be 13 minutes consistently after both qualifers and I do not have the most fuel efficient driving style lol I've done the one stop strategy before in some mains but always had to worry about how close I would be, with my JS engines I do it and have plenty of confidence it won't be an issue and don't have to adjust my driving. Thanks for all the support Ed!
#1580
As Ed said I worked out my mileage to be 13 minutes consistently after both qualifers and I do not have the most fuel efficient driving style lol I've done the one stop strategy before in some mains but always had to worry about how close I would be, with my JS engines I do it and have plenty of confidence it won't be an issue and don't have to adjust my driving. Thanks for all the support Ed!
#1581
Im running a Novarossi 9853 pipe with a 41021 header, I run the stock Losi clutch stuff but run a steel flywheel with 2 carbon and 2 aluminum shoes with all green springs and P4 plug and a 6mm restrictor. It makes for a really smooth and driveable powerband but still has plenty of power when you need it.
#1586
Thanks!! This is my second season running the Mugen MBX6, MBX6T and my first running the EBmods engines and fuel, I can't wait. I have a race in a month and I am really looking forward to showing how great these engines are.
#1587
Tech Adept
iTrader: (1)
Joined: Dec 2005
Posts: 218
From: Boise Id
Hey Erik look foreward to meeting you at the cabin fever race.I was the only one running the js engines in the NCT series last year and it will be nice to have someone else running them too.Mine are bone stock ones and have 6 or 7 gallons on them and still hold a great tune.I probably should hit Ed up for some help getting some new ones it wont be long till there done.Lee Hackney
#1588
#1589
Let me know when you want to be here I have plenty of room in my house!! One of our biggest races of the season is Memorial day weekend. Lee, I will be sure to meet up with you at Cabin Fever. If I remember correctly you and I went through the step on off section at the Great Snake side by side battling for the bump in buggy. That was a awesome battle!!! I am really itching to race I have not raced since the Maptson.
Last edited by ehames005; 01-16-2011 at 12:26 PM.
#1590
Tech Adept
iTrader: (1)
Joined: Dec 2005
Posts: 218
From: Boise Id
Ya I haven't raced nitro since the mapston we have some carpet racing going on here that I hit sometimes.I'm going to Ogden Utah next weekend to break in my new agama 1/8 scale.Can't wait but it is a four hour drive, the stuff we do to race
Lee
Lee





