R1ceboy is right, We are talking about a whole new ball game with the Sirio "evo2". They are factory mildly moded engines with performance at par with the newest generation of Nova based engines, so price is at their level, no kidding, these are serious powerfull mills.

AFM

.12 sirio AAC 5 port
 

how long should the fuel line be toward my engine? also the length for the return.

thanks in advance

Re: .12 sirio AAC 5 port
 

Fuel line towards carb should be enough to get to it in a smooth way.
Pressure line should be minimum 10". The longer you do it from there, tends to lean the mid-range, so you have to tune it for your application.
AFM

Trinity Sirio AF .15
 

hello all ive recently been looking at engines for my funny car and have stumbled across this onehttp://www2.towerhobbies.com/cgi-bin...5&I=LXDRC0&P=K



this thing any good??

is the a 1st generation/2nd generation thing like the .12s i need to worry about?

any help would be greatly appreciated

TIA

scott

Re: Trinity Sirio AF .15
 

I bought one and it ran ok.I put a Rossi carb on it and it woke up.Great low end power and top end was great too.

Mark

Quick question for you guys.

Do you guys usually add a head shim when you run 30% with your Sirio .12 engines? I already know about using the cold plugs, just wondering if adding shims will be neccesary with this engine.

Thanks

Hey people
Any ideas where I can pick up a Sirio .15 with slide carb and sg crank from HK?

Thanks :D

Hi Au

which s12 crank do you need? and which slide carby as well? 2 needle or 3 needle??

PM me

I am after a crank to replace my broken sirio .12 one, but also trying to source a new engine - .15 slide carb, sg crank if possible :)

We have the crank. also s15 is use s12 carby as well if you still need one.

Sirio 12 conrod/wrist pin/clips
 

Hi,

Where can I buy a new conrod, wrist pin and clips for a Sirio .12 that will post to Australia?

Re: Sirio 12 conrod/wrist pin/clips
 

You can get most Siro parts from Max tech Innovations :sweat:

Cheers! Will drop them an email:D

Anybody...

Let me try

Not necessary. I used 30% trinity fuel, std shim and OS #6 & #7 turbo plug. check the plug condition after.

good luck