i am still trying to work out the details on the crank coatings . i really hope it works out quickly :nod:

if properly run in , the engines should last for a min. of 6 gallons .
again , if properly run in , there is no need to replace the rod after break in :)

no , the crankpins are not coated on the nova engines but i have seen them last and stay within tolerance for 16 gallons personally ;)


happy motorin',
monty

Houston:
What pipe combo to use with P5Xs Hot Mod, and prefered plug?

Best regards!

http://i145.photobucket.com/albums/r...s/houstons.jpg
:D:D:D:D

I want one ^^^

i recommend dynamite 086hs if you are on a budget , if not , the 9886/41021 or 41020 combo is verrry goood :nod:

Monty how will the nova 41005header and 9853ss feel compared to the DYN 086..WHich will have better run times..I will be running a 6mm venturi as well

better runtimes from the 9853 setup


the dynamite 086hs works awesome with the bf limited :nod:

Monty,
any luck in finding me a 41021 header in your stuff, I'm going to pair it with a Rex 9886 pipe for my p5xs PLUS :)

no luck and they aren't available at the moment :(

i will let you try a 41020 , works very well with the 9886 pipe trevor :nod:

I have to give big props to Monty. I borrowed a friends modded 3 port this weekend and I have to say, it was very impressive. I was getting 10-12 minutes of run time and it had plenty of power to go along with it, dialed little engine.:tire:

tommy's or carl's :D

Tom's:tire:

how did it feel to ya ?

did it feel like a sport engine ? ;)

Not at all. I was pleasantly surprised. I didn't feel like I was at a disadvantage at all. I could make a triple that a lot of other guys could not. You will be getting an order from me soon. I'm just trying to buy this one off of Tom first.:smile:

houston ...i know its been asked and answered here ..sorry to not wanna go back through these hundred pages :blush::sweat:on the plus 4 ....will a grp pipe 2053 work well with this motor ..i am asking as a friend had been running one and his plus4 never ran quite right ...he swaped it for a dyn 053 and it ran perfect ..is this pipe grp 2053 not good on the plus 4 or maybe something is wron with the 2053? i could have sworn someone said they 2053 work decent on the plus 4 ...thanks in advance :nod: