Hey Monty,

I'm getting the new N21R Limited 3 Port for a small race/ club race motor. What is the best plug to run in it? Is the 9886 and Square Bent ] Header the best combo for it?

I recommend odo100 plug and a dynamite 086hs or 9886/41021

ran that pipe combo on our ours and it seem perfect.

My shop carries the Mccoy Plugs. Any of those work good? Not really up to speed on standard plugs, lol!

Mc8 for mccoy plugs , mc59 is very hot and I have seen quite a few filaments from those plugs go through engines , mc9 is very cold and can be difficult to tune but yields good power.

Brian Larrys use to carry odo plugs. Which hobby shop do you use.

plugs are easy to ship if you plan ahead ;):D

more plugs/pipes
 

Can anybody tell me the best plug to run in a plus 21-5K running 30% byrons and a pipe header combo for a short track. I have a mugen 1005 pipe combo and wanted to know should I stick with it or is there some thing better.
Thanks for any help

Hey Monty,

Yea, lol! For pipes, the 9886 and 41021 is the ticket, huh? I already have the 9886, But dont have the 021 Header yet. Will a Jammin Smooth Header work in place ot it? Engine will be here Thursday, Breaking it in for a 50/50 Race this Saturday!

:nod::nod:

hahaha Monty, Im gonna beat you to it :p

yes Brian you can, the Jammin header is quite good..a good header to have in your box, especially if its a chrome one......kinda funny, I told you 9886/41021 header on S grid way before you asked on here, I know how he thinks and what I learned from him and I know what works...well I know a little at least:lol: thanks for all the help Monty and everything you have done for me and taught me, your a good friend indeed:nod:

Merry Xmas to the Houston Family :)

Monty

Thanks for the fast shipping on the FMS. It was in Ohio before me. I can't see it yet, but I know its here. Let me know when the pipes and rod/bearings ship to Texas. Thanks for all your help and putting up with the confusion Monty.

i ssaid i like the 9886/41021 or dynamite 086hs ;)

find what you like by trying different pipe combos for yourself :)

yes the jammin header works very well on that pipe .

be patient with the engine and will last you a long time :nod:

pipes/parts are on the way to my house but not sure if they will be here before xmas and i ordered a bunch of the factory novarossi double shield bearings that come stock on the plus4 , fms , toro nero engines also !!these are the best front bearing on the market , period!!!


HO HO HO !! MERRY CHRISTMAS AND HAPPY NEW YEAR TO YOU (TREVOR) AND EVERYONE IN RCTECH LAND !!!! :D

Thanks Monty and Trevor. ;)

Hey man..give some early advice...New P5 Turbo in buggy....086 short header?