2LikesGo-Tech Engines Thread
05-23-2011 | 04:58 AM
Tech Apprentice
iTrader: (3)
Joined: Dec 2010
Posts: 92
From: NSW Australia
Dont know what to buy
After an airfilter malfunction my Go 5 port got hungry and ate some dust ending its life at a club race this weekend. I have to admit I was a little heartbroken and couldnt bring myself to bin it. Instead i pulled it apart and oiled it before sitting in a draw never to be used again. I was like loosing a family pet 
I also have a MG66 and honestly think with a good tune the standard 5 port was as good. Now I have the chance to buy another motor 
Do you think i should grab a MG66 or the new 5 port. I know this will start a bit of a debate, but I dont know what to put in my truggy. My new engine choice is in your hands
I also have a MG66 and honestly think with a good tune the standard 5 port was as good. Now I have the chance to buy another motor Do you think i should grab a MG66 or the new 5 port. I know this will start a bit of a debate, but I dont know what to put in my truggy. My new engine choice is in your hands
05-23-2011 | 05:51 AM
Joined: Dec 2009
Posts: 7,916
From: northern michigan
After an airfilter malfunction my Go 5 port got hungry and ate some dust ending its life at a club race this weekend. I have to admit I was a little heartbroken and couldnt bring myself to bin it. Instead i pulled it apart and oiled it before sitting in a draw never to be used again. I was like loosing a family pet I also have a MG66 and honestly think with a good tune the standard 5 port was as good. Now I have the chance to buy another motor
Do you think i should grab a MG66 or the new 5 port. I know this will start a bit of a debate, but I dont know what to put in my truggy. My new engine choice is in your hands
I also have a MG66 and honestly think with a good tune the standard 5 port was as good. Now I have the chance to buy another motor Do you think i should grab a MG66 or the new 5 port. I know this will start a bit of a debate, but I dont know what to put in my truggy. My new engine choice is in your hands
05-23-2011 | 06:14 AM
05-23-2011 | 07:43 AM
After an airfilter malfunction my Go 5 port got hungry and ate some dust ending its life at a club race this weekend. I have to admit I was a little heartbroken and couldnt bring myself to bin it. Instead i pulled it apart and oiled it before sitting in a draw never to be used again. I was like loosing a family pet I also have a MG66 and honestly think with a good tune the standard 5 port was as good. Now I have the chance to buy another motor
Do you think i should grab a MG66 or the new 5 port. I know this will start a bit of a debate, but I dont know what to put in my truggy. My new engine choice is in your hands
I also have a MG66 and honestly think with a good tune the standard 5 port was as good. Now I have the chance to buy another motor Do you think i should grab a MG66 or the new 5 port. I know this will start a bit of a debate, but I dont know what to put in my truggy. My new engine choice is in your hands
05-23-2011 | 03:27 PM
Tech Elite
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
For truggy I would go with the GXII-5RHO. If for no other reason the lighter weight and newer technology. It does have supurb smooth power as an added bonus . I sell both motors, and at this time that would be my advise for a truggy motor.
. I sell both motors, and at this time that would be my advise for a truggy motor.
05-24-2011 | 01:29 PM
Tech Elite
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
05-24-2011 | 01:32 PM
Joined: Dec 2009
Posts: 7,916
From: northern michigan
05-30-2011 | 09:15 AM
Tech Initiate
iTrader: (1)
Joined: Mar 2011
Posts: 42
engine mount
hi guys was thinking of upgrading my engine mount in my 2010 xray 808, will the detachable top mount that comes with the kingsheadz engine mount be suitable for the new gxii or does it require a different top mount?is the standard or the extended version the most suitable or does it matter for the buggy im putting it into
05-30-2011 | 09:18 AM
Tech Fanatic
Joined: Aug 2008
Posts: 891
From: Texas
hi guys was thinking of upgrading my engine mount in my 2010 xray 808, will the detachable top mount that comes with the kingsheadz engine mount be suitable for the new gxii or does it require a different top mount?is the standard or the extended version the most suitable or does it matter for the buggy im putting it into
05-30-2011 | 09:18 AM
Joined: Dec 2009
Posts: 7,916
From: northern michigan
hi guys was thinking of upgrading my engine mount in my 2010 xray 808, will the detachable top mount that comes with the kingsheadz engine mount be suitable for the new gxii or does it require a different top mount?is the standard or the extended version the most suitable or does it matter for the buggy im putting it into
