you sent me his name, i dont remember, it was the S&W thread! he started the thread, gave me a price of ........should i say here?

EDIT:....I just confimed it is $100+ shipping for 4 gallons.....only until a distributer is setup.
Now back on topic....ive got word that the usa factory team guys have already got their new motors....can't wait to here how they do

yup... puddin' put pics of his on facebook. looks sick!

meanwhile... I have a new home for mine, when the rest get here:
http://i130.photobucket.com/albums/p...1/IMAG0264.jpg


For now my trusty GX7-R is sitting pretty w/ a 2072 pipe and long needle. :cool:

Yep, Chad does nice work ;)

The orange will go well with the GO orange. :lol:

yeah I go to Chad for all my wraps. I had him use the same pattern he did for my MBX6-T, so now the match :cool:


By the way... guys please check out the www.premierehobbies.com GRAND OPENING. They've got a grand opening giveaway w/ a $500 credit for 1st prize and 2nd prize is a GX-5R.

http://premierehobbies.com/content/i...andopening.gif

Go needs a new GXRII version of their old 25...

:weird:

i like to drive the .25 6 ports for fun. They got some power. But the Gx5R has more than enough bottom for racing, pulls alot longer and revs higher the the .25. Plus gets like 1:30+ mins longer of run time.

I'm not currently racing, just running an SC8 and a DM-1 onroader, and it would be nice if there were more "tweeners" (between 21 and 28) out there besides the OS 25 and (hard to find) Alpha 23... I bet a revamped Go 25 would sell well...

There are plans to update the .25-ish.

:sneaky:

Lol....flannos got a green headed monster:sneaky:

I was just bumping the thread, hated seeing it on page 3 :D

Congratulations to "Pato" Concha on winning the South American Pacific Cup On-Road GT class with his GO GX-7R. Well done mate :D

hi everyone,
I just purchased a 3 port go engine, from a guy I work with. He informed me that it has only had approx 3 litres through it, and I believe him as it still has heaps of compression. The only thing was, that when I took of his old flywheel, the front bearing shield has fallen off, and it looks like the outer bearing cage is partly missing, on my lounge room floor. How hard is it to change the front bearing, and what size is the bearing?
thanks
Michael

dejavou lol
front bearing is : 19 x 7 x 6
& i bought this to do the bearings : http://www.amainhobbies.com/product_...nd-14mm-cranks
others will come on with other ways to do the bearings, grizz !