![]() |
I might throw a 0801 pipe on the MG66 for a round this Sunday and see how it goes:sneaky:, its our clubs first ever club day:D
Magpie and Higgo will be up for the day so we will see how she GOes.... Bring on Sunday:sweat: |
Originally Posted by Stalkie
(Post 7678376)
I might throw a 0801 pipe on the MG66 for a round this Sunday and see how it goes:sneaky:, its our clubs first ever club day:D
Magpie and Higgo will be up for the day so we will see how she GOes.... Bring on Sunday:sweat: |
i hope you make a GO ENGINE basic tuning video like this novarossi video
http://vimeo.com/7595905 |
Originally Posted by BiggB0SS
(Post 7677840)
I suck and I have a 7port. Witch pipe will smooth out the powerban?
|
Originally Posted by Stalkie
(Post 7678376)
I might throw a 0801 pipe on the MG66 for a round this Sunday and see how it goes:sneaky:, its our clubs first ever club day:D
Magpie and Higgo will be up for the day so we will see how she GOes.... Bring on Sunday:sweat: The 2072 out performed it on the dyno, but I want to see how it performs on the track. The 2072 is good on fuel and helps the 66 rev hard without loosing bottom end. I suspect the 0801 will increase bottom but want to know if limits top end and any changes in run times OK Stalkie. |
Originally Posted by max_chen
(Post 7678489)
You can't disappointed to setup APlus 0801(reinforce stinger) on MG66.:nod:
Rex |
Originally Posted by 22Racer
(Post 7680234)
I just got 4 of the new 0801 pipes in today, can't wait to try one! Also got the 2081, how does the 2081 perform? I hear it's more low end?
Rex Sure.:D |
Originally Posted by Flanno
(Post 7679577)
Let me know what ya think of the 0801.
The 2072 out performed it on the dyno, but I want to see how it performs on the track. The 2072 is good on fuel and helps the 66 rev hard without loosing bottom end. I suspect the 0801 will increase bottom but want to know if limits top end and any changes in run times OK Stalkie. WOOHOO first club race day only 13 hrs to go.....:lol: |
Originally Posted by Stalkie
(Post 7681556)
OK mate...I will put Magpie to work on the stopwatch:weird: and see how much punch the 0801 puts through the MG.
WOOHOO first club race day only 13 hrs to go.....:lol: |
:ha: What are you saying Magpie:cry: you wouldnt pit for me:cry: ;) LOL
Thats OK , I've got the wife for that:nod: But I prob wont get to run truggy tomorrow if we only have one group as I have to pit for her:( The 0801 pipe gives the GX5 port a bit of crack, Tracy has it in her truggy and it pulls little wheelies more often than mine that has the 2072(same trug&engine) |
:D Magie :lol:
Thanks Stalkie. :tire: Good luck tomorow guys. |
Originally Posted by Stalkie
(Post 7681704)
:
But I prob wont get to run truggy tomorrow if we only have one group as I have to pit for her:( catch ya in the morning |
i have a gx7r pipe combo... just recently its played up. HSN is flush. idle is 0.7mm. now heres the problem... i can keep turning in my LSN and its just so rich still... so i leaned even more and more... heaps of smoke... mybe 20kmph tops... with a pile of smoke...
i've checked everything... mybe a glow plug issue? its looks fine but mybe? |
Can someone with some tuning experience/expertise of the GX 7R summarize some essential tuning tips of this engine for us, please? I have not read the entire 740 pages of this thread...
|
Originally Posted by lomdel
(Post 7685514)
Can someone with some tuning experience/expertise of the GX 7R summarize some essential tuning tips of this engine for us, please? I have not read the entire 740 pages of this thread...
|
| All times are GMT -7. It is currently 07:22 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.