Community
Wiki Posts
Search
Like Tree2Likes

Go-Tech Engines Thread

Thread Tools
 
Search this Thread
 
Old 02-10-2010 | 07:27 PM
  #9961  
MAGPIE-121's Avatar
Tech Fanatic
iTrader: (10)
 
Joined: Nov 2009
Posts: 859
From: Budgewoi NSW
Default

Originally Posted by shanef
weren't the old ones working and you had to up the dosage?
what ever happened to patient confidentiality !!!!!!!! bloody doctors
MAGPIE-121 is offline  
Old 02-10-2010 | 07:29 PM
  #9962  
MAGPIE-121's Avatar
Tech Fanatic
iTrader: (10)
 
Joined: Nov 2009
Posts: 859
From: Budgewoi NSW
Default

shane how is that motor going ?
MAGPIE-121 is offline  
Old 02-10-2010 | 08:26 PM
  #9963  
22Racer's Avatar
Tech Elite
iTrader: (67)
 
Joined: Mar 2002
Posts: 3,150
From: Wanamingo Mn
Default

Originally Posted by meno222
do you guys know if a p/s from a 3p race fit n 3p sport engine case. thanks
Yes it will fit fine, all Go .21's will interchange. The sport case has a 25mm bearing instead of the 25.4mm in the race models. Also the case on the sport does not have the cuts milled in it above the rear bearing, may be a slight decrease in power. A bigger factor may be the case on exhaust port might not be tall enough on the sport case. It will run just fine, performance may be a little less though.


Rex
22Racer is offline  
Old 02-10-2010 | 11:08 PM
  #9964  
Blackie001's Avatar
Tech Adept
iTrader: (1)
 
Joined: May 2009
Posts: 190
From: Sydney Australia
Default

Originally Posted by MAGPIE-121
lol i've got new arthritus meds & viagra
LMAO, Nice!
Blackie001 is offline  
Old 02-11-2010 | 12:49 AM
  #9965  
shanef's Avatar
Tech Master
iTrader: (38)
 
Joined: Oct 2009
Posts: 1,907
From: Qld, Australia
Default

Originally Posted by MAGPIE-121
shane how is that motor going ?
It arrived back on tuesday after some massive mods tlc (mark replaced both bearings, p/r/s, crank and gave it a rough tune).

Went and got a complete clutch setup for it today so i now have 2 engines complete with clutch's on so if anything happens to either of them on race day its only a 5min job instead of 30 to change them over.

Won't be able to get a tune on it before sunday so i'll race with the alpha and hopefully get a tune on the go sometime nextweek.
shanef is offline  
Old 02-11-2010 | 05:57 PM
  #9966  
MassiveMods's Avatar
Thread Starter
Tech Master
 
Joined: Jan 2006
Posts: 1,977
From: Sydney
Default

A MAin Fuels will be avail at MOTORAMA

Any questions please don't hesitate !

Cheers MM
MassiveMods is offline  
Old 02-12-2010 | 08:37 AM
  #9967  
su3zero's Avatar
Tech Adept
 
Joined: Jul 2008
Posts: 168
From: Rio de Janeiro - Brazil
Default

thank you all guys.

thanks lowlife88.. for the help

today Go GX-5R go "in Stock" at amain hobbies and as fast as i can, i got mine!
su3zero is offline  
Old 02-12-2010 | 10:46 AM
  #9968  
Ruune's Avatar
Tech Fanatic
 
Joined: Aug 2008
Posts: 891
From: Texas
Default

Originally Posted by su3zero
thank you all guys.

thanks lowlife88.. for the help

today Go GX-5R go "in Stock" at amain hobbies and as fast as i can, i got mine!

Yes, amain should be well stocked for a bit. I did just receive an order for a few parts, etc.

Also, moto has a large shipment of parts on the way.
Ruune is offline  
Old 02-12-2010 | 10:50 AM
  #9969  
su3zero's Avatar
Tech Adept
 
Joined: Jul 2008
Posts: 168
From: Rio de Janeiro - Brazil
Default

now i need to choose a good pipe... but will not buy now...

what pipe do i have to use?

i'll race 90% of time at this track:



thanks again
su3zero is offline  
Old 02-12-2010 | 10:52 AM
  #9970  
Ruune's Avatar
Tech Fanatic
 
Joined: Aug 2008
Posts: 891
From: Texas
Default

EFRA 2072 on the 5-port will be DIALED.
Ruune is offline  
Old 02-12-2010 | 12:22 PM
  #9971  
rider313's Avatar
Tech Elite
iTrader: (94)
 
Joined: Sep 2009
Posts: 4,436
From: MN
Default

Originally Posted by Ruune
EFRA 2072 on the 5-port will be DIALED.
+1. thats a great combo. cant wait to get some more nitro threw mine/
rider313 is offline  
Old 02-12-2010 | 05:40 PM
  #9972  
mattwoodcraft's Avatar
Tech Elite
iTrader: (10)
 
Joined: Jul 2004
Posts: 2,747
From: perth / australia
Default

the 2072 will provide the best overall performance for sure from start to finish
mattwoodcraft is offline  
Old 02-13-2010 | 01:23 PM
  #9973  
Madbrad's Avatar
Tech Addict
iTrader: (30)
 
Joined: Oct 2005
Posts: 734
Default

im working on a Go tech 3R and need to replace the HSN and LSN gasket . I found this one but im not sure if it will work for both are the ydifferent ?
Link
Madbrad is offline  
Old 02-13-2010 | 02:14 PM
  #9974  
MAGPIE-121's Avatar
Tech Fanatic
iTrader: (10)
 
Joined: Nov 2009
Posts: 859
From: Budgewoi NSW
Default

they will get u going, or these will last longer : -http://www.massivemods.com.au/produc...roducts_id=207
MAGPIE-121 is offline  
Old 02-13-2010 | 03:21 PM
  #9975  
bigmatt's Avatar
Tech Master
iTrader: (16)
 
Joined: Mar 2008
Posts: 1,485
Default

cut some silicon fuel line to the thickness of the o-ring,and install. Works perfect. And buy the ones from massive mods. They last forever.
bigmatt is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.