+1 here too..awesome noise ,power and runtimes..getting 12m20 with a 7mm insert here and more power than I know what to do with :eek: even though I broke off my stinger and had to make a new one..MG66 with ceramics rocks..

ps
it also eats my rear drive and diff pinions....damn!!! too much power...really have to keep the mesh shimmed tight tight tight or it tears the teeth off...destroyed 3 small pinions and 2 main diff pinions this year before I realized it needed to be tighter meshed.

great advise Mark :nod:

i cant wait till the weekend to get out again and rip up some dirt :eek:

I mentioned something about this not long ago.
This was always a big problem, in years passed,
No one had or kept there web sites up to date.
You never knew if someone had engines and
parts in stock much less if what you needed
was even in the country. Most times you got
told that they would try to get in touch with
Russ and they would let you know the availability.
In other words, it was always a pain in the ass.
So to whom it may concern, come on guys, get
your shat together. There I said it.

Hello,
Rex (22Racer) doesn't have an RW Mods site up yet. It is something we are working on for the future. If you wish to order through him or have any questions, you can send him a pm or email.

Thanks,
Kendall

Hey guys, I hear what you're saying. As I stated a couple of days ago, I sent some motors off and a losi buggy off for a photo shoot. I should be getting these back today, and my webmaster is going to be getting more done on my web site. We are also planning on doing a track shoot sometime this week. I would have had something more up by now, but I was told that I could get much of the graphics I needed from the artist in Taiwan. However, they has been less than forthcoming with what I need. I've opted to work with some people domestically on what I need.

As far as inventory levels, please work with your dealers or online retailers. So far I have not had any problems communicating inventory levels or processing orders for dealers.

Hey T and the rest of GO guys, please don't take
my last post the wrong way. I just want to see the
new and improved "GO Engines USA" and all of the
distributors have a kick ass 2010. Getting the main
site going with a list of all the distributors and how
to get ahold of them should be a priority. I know it's
going to happen. Rex and a few others know me pretty
good by now. I will continue to stir up the coals, to help
make GO Engines the HOT, HOT item to own in 2010.

Thanks guys for the responses I will ping 22Racer (Rex) with my needs - I like websites as it helps me to figure how much of a budget is required....

Ruune - glad to hear the site will be up soon, hopefully there will be some pdf's with the GO Engine manuals/parts lists - maybe some stock dyno charts etc.

I like the 2 GO based motors I have from EB, they truly scream :D

Sadly - one had a clutch bearing tear the crank snout up hence my need for parts...

Thanks again -

what are you guys getting out of the 5 port compared to the 7 port?

what are you guys getting for run times out of the 5 port compared to the 7 port?

Lots of variables with run times, but the 5 and the 7 will be pretty close in total run time.
It seems 9 - 9.5 in a buggy is pretty average, and more in the truggy, say 10 - 10.5, more if you push it with tune and throttle EPA, restrictor and smooth throttle finger :)
It will vary a lot from person to person.

thats all i needed grizz thanks.

Look for a go engine dealer or seller
 

I am looking for 2 go techs for the crcrc race in jan?? Who has the motors in the USA????

PM "22racer" or "motomatt", thay are both Go Engines
dealers and good people to deal with.

Yes, I have 2/Gx 5 ports and 2/Mg66's.

Rex

I have a 3 port rb rippondiculas that I get 14+ minutes out of. But as stated there is a lot of variables that go into that. racing it I usually pit at the 12-13 min. mark. One thing I have done is read and reread all the info on tuning these engines and the head shimming.[very important] I also switched all of my carbs to the go 5.5 carbs. They have the red on front of them. There are 2 other things I do to my go's. I preheat and use a product called militec on the inside of the engine. I just oil every bit of the inside,heat it up and spin on the starter box for a few minutes. Let it cool then fire it up. Militec for those who do not know is used for fire arms in Iraq. After that is done I then add some of massive mods run in oil in the fuel for 1 full tank and run the tank dry then let it cool and run in as prescribed.