|
Os #8 should be fine , we have run them on our .25.
Here's a pic of Kendall at round 5 of our series, he Tqed all rounds of qualifying in all 3 classes and won buggy and truggy and got 3rd with the new Kyosho Rt5 electric. (crashed on the first lap ouch) http://i291.photobucket.com/albums/l...h/100_0513.jpg |
good job!
|
Originally Posted by Gizmatron
(Post 6285564)
With 3 liters through the MG66 I started to lean it a little this morning at the track..have been getting 9m30 runtimes with a 7mm insert and very rich mix..leaned the hsn in a 1/4 turn and it started to really scream..another 1/4 turn in and it went mad...runtimes jumped to a steady 11m45-11m50..top end is totally insane..I am going to try the 6.5 insert..can anyone confirm that GO are supplying a 6mm insert with the GX series??? I got 6.5 as the smallest in the MG's box..If not I'll be hunting a 6mm down online..
This is the maddest thing I have ever driven..It screams like a banshee after just 3 liters..pinch feels little reduced from brand new..I think the fact GO relaxed the initial pinch on their motors is a fabulous idea..easier on the starter box and less stress on internals period! Oh how will I wait 2 gallons for the ceramics etc..more to the point how will I keep it on the ground! With the MG66 we will be releasing our own set of venturis for the engine , we have designed a set of 6 for the MG66 . Normally reducing the carb throat gets more thank time but we have peopel getting 11 mins with 8 mm out of the box so i think 6.5 is small enough for this engine. |
Originally Posted by mattwoodcraft
(Post 6286158)
all thge best for the ACT event mate hope all goes well:)
Thanks Mat. Adam, Deano and Sov will be there also, to keep me on my toes :D |
Originally Posted by MassiveMods
(Post 6288216)
I made the suggestion to go down to 5 , 5.5 and 6 mm venturis about 6 months ago .. I think Simon Yii is designing a new set for the GX range which will be awesome ! ive seen some of his designs so far and they look goood ! Nothing released yet as far as i know .
With the MG66 we will be releasing our own set of venturis for the engine , we have designed a set of 6 for the MG66 . Normally reducing the carb throat gets more thank time but we have peopel getting 11 mins with 8 mm out of the box so i think 6.5 is small enough for this engine. As far as i know, GX series are 6.5mm, 7mm, 7.5mm and 8mm carb inserts. Usually on a big track where i practice, i do get 08.45 minutes of runtime, and i tried this : - 7.5mm venturi - 1.0 clutch spring (were using 1.1 before) - VP PRO EFRA 3023 pipe - 75% carb opening I ended with 11.15 minutes of runtime on my 7 port engine, and at racing pace i didnt have any problem with RB's, Novas and OS's around me ... cya ! |
My Go .25 6-port just came in from AMain. Came with a break-in shim and instructions, but no plug. :weird: I must be gettin old...lol... back in the day all of my OS and RB stuff always came in with plugs and accessories. OS #8 it is...medium-hot.
I can't wait to get this thing on the starter box! |
good luck to to you lot as well , im thinking i will have to get accross on another big meet , i will see what is happening in november , next time i will pick your brain more about these motors as at times im sure i wear Marks ears out :lol: .....
I got the last MG66 mark sayslooking forward to sputting it my truggy ready for our WA cup challange in 3 weeks i will be running it in 2 days befor racing it |
Originally Posted by tonydig11
(Post 6288016)
good job!
Thanks, bro. |
+1 on that Kendall :nod: Nice day at the office. Keep it up :cool:
|
Originally Posted by mattwoodcraft
(Post 6288760)
good luck to to you lot as well , im thinking i will have to get accross on another big meet , i will see what is happening in november , next time i will pick your brain more about these motors as at times im sure i wear Marks ears out :lol: .....
I got the last MG66 mark sayslooking forward to sputting it my truggy ready for our WA cup challange in 3 weeks i will be running it in 2 days befor racing it |
Originally Posted by MassiveMods
(Post 6292538)
Yeah you got the one in my display case !
|
just knowing that it was the last one until the next lot makes me feel all warm and cosey :lol:
im after pure domination at our next big race event :sneaky: |
Originally Posted by bigmatt
(Post 6292767)
on the web site you have 4 different mg66 setup's to buy. Are all 4 versions sold out?
We will open sales to the USA mid Sept . We will have USD Pricing and shipping options avail on the site. Yess all the combos are completely sold out ! took 3 days to sell the first 100 units .. :D Hang tight and ill get it on line. FYI we will also be releasing regional distributors for each country that have stock . So we would like you to support your local MG66 dealer ;) Cheers MM |
Originally Posted by MassiveMods
(Post 6293071)
HEy Matt
We will open sales to the USA mid Sept . We will have USD Pricing and shipping options avail on the site. Yess all the combos are completely sold out ! took 3 days to sell the first 100 units .. :D Hang tight and ill get it on line. FYI we will also be releasing regional distributors for each country that have stock . So we would like you to support your local MG66 dealer ;) Cheers MM |
Worth the wait Matt :nod:
Our NZ distributor sold out his first order within a few days, and their queing up for the next batch :D Now peope are seeing how easy the motor is to run in, and the performance that's starting to become apparent as they get a few litres through, the second batch will probably go in a similar time frame :D |
| All times are GMT -7. It is currently 10:31 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.