2LikesGo-Tech Engines Thread
06-16-2009 | 03:16 AM
#7231
you know I will have to say that my 21 7pt turbo has kept up with any modded and non modded motor at my track. Just put on k2 panthers last race weekend and wow what a difference. Thinking about trying another motor not really looking for a 5pt but probably the 3pt race anyone run one? I want to know how well it runs in a buggy on a medium technicality track.
if you get one you wont be disapointed im getting around 11-12 mins run time out of mine out track is tech and has some large jumps out of the corner eg triples and have no worries clearing that at all
06-16-2009 | 03:22 AM
#7232
you should also do a pinch test see how rich or lean your carby settings are on lsp needle.and screw your hsp needle out flush again start your tuning again...
i assume that you have the new long lsp needle and most of your tuning will be done on this lsp needle
i assume that you have the new long lsp needle and most of your tuning will be done on this lsp needle
06-16-2009 | 06:06 AM
#7233
Tech Adept
iTrader: (2)
Joined: Oct 2008
Posts: 166
HiVoltg12 Where is Mark?
--------------------------------------------------------------------------------
Has anyone heard from Mark at MassiveMods?
I ordered the new 2072 pipe on 5/30. Mark communicated to me on 6/3 that he was expecting the pipe to be in by 6/5 and it should be shipped on 6/8. Since then I have sent him two emails and a PM on rctech with no reply. My order is still showing as "processing" on MassiveMods.com. My paypal has already been billed so we're not waiting on them.
So has anyone heard from Mark? Just wondering if he is out of town or something? All the feedback on rctech has been positive regarding MassiveMods so I have to wonder if something is up?
--------------------------------------------------------------------------------
Has anyone heard from Mark at MassiveMods?
I ordered the new 2072 pipe on 5/30. Mark communicated to me on 6/3 that he was expecting the pipe to be in by 6/5 and it should be shipped on 6/8. Since then I have sent him two emails and a PM on rctech with no reply. My order is still showing as "processing" on MassiveMods.com. My paypal has already been billed so we're not waiting on them.
So has anyone heard from Mark? Just wondering if he is out of town or something? All the feedback on rctech has been positive regarding MassiveMods so I have to wonder if something is up?
06-17-2009 | 02:33 AM
#7234
Tech Regular
Joined: Aug 2008
Posts: 445
From: 48.137499,11.575494
exact Rear Bearing Size 217PT
Hey Guys,
I'd like to give my Gen5 217PT a complete overhaul and as part of that procedure I'd like to install new bearings - TKO ceramic or Boca.
Can anyone tell me the exact size of the main bearing, please?
Thanks in advance!
Regards,
T
I'd like to give my Gen5 217PT a complete overhaul and as part of that procedure I'd like to install new bearings - TKO ceramic or Boca.
Can anyone tell me the exact size of the main bearing, please?
Thanks in advance!
Regards,
T
06-17-2009 | 03:45 AM
#7235
Tech Elite
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Front bearing is 7 x 19 x 6mm
Same as OS VSpec, RB, Novarossi. So any bearings you find for those models will do the job. A-Main has the TKO's at a reasonable price.
If your going all out, throw a new Gen 5.5 crank and TiNi coated wrist pin in as well. Ha, I love spending other peoples money
06-17-2009 | 03:48 AM
#7236
[CB-MR 25414] this is the tko ceramic bearing part number
06-17-2009 | 04:17 AM
#7238
Tech Regular
Joined: Aug 2008
Posts: 445
From: 48.137499,11.575494
Guys,
thank you A LOT!
I know Massive Mods have great prices, specially engines incl. worldwide shipping, but since I live in Germany, I'm a little concerned about shipping costs AUS to GER compared to the price of the bearing itself. I guess I have to ask some friends, so we can order at least some more bearings...
Regards,
T
thank you A LOT!
I know Massive Mods have great prices, specially engines incl. worldwide shipping, but since I live in Germany, I'm a little concerned about shipping costs AUS to GER compared to the price of the bearing itself. I guess I have to ask some friends, so we can order at least some more bearings...
Regards,
T