Yes just put the HSN back to 1 turn in from flush, and the LSN 1 turn in from flush, and start over with it, and just go easy with it.

Flush?

Mine went too 320 one time ran there at the track without lean bogging too it was amazing what we did is riching it and let it cool went back out there and it ran perfect lol.

yes flush, HSN Flush with the top of the needle housing, and 1 turn in on the LSN

yah my fuel line is all new and should be fine. i am probably going to the track this weekend and will richen it out till i get around 230- 260?

Hey brian also there is a little bit of black goo coming from the front bearing i am thinking it is just the grease in them?

Hmm, if the bearings is pushing anything out that tells me it is still rich, it could be some of the grease that got cooked at 370:nod: run it in more at the track after you faten it back up, let me know how it goes. just go easy with it for a few tanks and then start leaning it to make some power, just don't go full race tune right away. The motor is still tight so don't kill it by leaning it out to fast

carb problens
 

hi can any one give me some addvice?? my carb keeps moving on my go 21 7 port, i have done the pinch bolt up as tight as i can but it still moves if i turn the card at an angle it goes tight but when and is ok but i am not happy running it at such a angle can anyone help????

Get an angle grinder and grind a bit off the middle of the pinch bolts where they touch together at the middle, this should fix it.

GO Rulez.......I got 3rd at Hot Rods last night was running against some expensive known power house engine.....Would of had 1st but I couldn`t keep it once I got it...Oh well there`s always next time

I think the 3 ports are in stock my is gonna be shipped monday better hurry there going fast.

In stock where?

Email Russell ......I think there in stock all you can do is Email and see. [email protected] Tell em Justin Dyer told ya.

He doesn't post here so I figured I'd let you guys know, Chris Pace finished second at the East Coast Nitro Series behind last year's defending champ. After some bad luck he bumped from the B and moved up through the field nicely. Pretty sure he was running a modded motor by Brian.

Yeah he runs the CEO mod GO tech's.

nah, the motor you saw in his car at Motorama was mine, it is modded by CEO. Chris doesn't run them, he just borrowed mine that weekend. His new one is one that Brian did.