Harold996tt

[QUOTE=PinoyCali;14231023]Quite a few people run the Spec 2 of this motor.

TPR 1

iTrader: (27)

Hi guys
quick question what size block do you put under the chassis when you measure the kit rebound settings?
thanks in advance

RoketRdr

iTrader: (2)

This is a buggy platform so you need to be using a 1/8 offroad setup kit which uses a 20mm block. But this has nothing to do with shock rebound.


Has anyone seen the other body from Mugen that is available for the GT?

Grenade10

iTrader: (40)

[QUOTE=RoketRdr;14265546]This is a buggy platform so you need to be using a 1/8 offroad setup kit which uses a 20mm block. But this has nothing to do with shock rebound.


Has anyone seen the other body from Mugen that is available for the GT?[/QUOT
Bodies are A - ProtoForm, same as was in the DM-1 Spec
B - Blitz, that Desoto sells. Good body.

RoketRdr

iTrader: (2)

I already know about those bodies. There are two that Mugen is offering for the MGT7 and I've only seen one of them. Want to see the other option painted up so I can see how it looks and what style it is.

RoketRdr

iTrader: (2)

Aahhhhh...now I see. They're using the Protoform and Blitz bodies as their factory options. Gotcha.

British Menace

I love the Mugen/ Blitz body although I think the wing is a little OTT but the body itself is great!
I still like the Alpha body too. The R3 is it? I think Alpha has brought out the second version of his body...... anyone have it or tried it yet?

Regards
BM

Grenade10

iTrader: (40)

Some racers have a few of the first bodies, including some with the "Wavy Spoiler"
You are correct in the R3

Paper2

Hey guys, first apologize for my ingles.Me present in this forum, I am the mechanical and brother of Toni Santana and together we form the team Santana rc, just joining Mugen Espaņa.Acabo installing the new drive MGT7 2 weeks and perfect.

British Menace

Welcome Paper2. I hope you enjoy your MGT7 car and the forum.

Regards
BM

UrabusDenis

Hi, could anyone give me the measurements of the diameter and length of the MGT7 shocks shafts? In mm preferably

British Menace

Hi

Yes
The dampers have a 16mm bore and are approximately 90mm fully extended depending how far you screw on the plastic shock ball mount

I hope that's what your after.

Regards
BM

Paper2

Thank you British Menace

Wobblyboot

iTrader: (14)

2015 AARCMCC QLD Championships 1/8th IC GT

Ian Haley back on the top step.
The first State championship for GT in Queensland proved what an exciting class GT is, everyone so closely matched.
Ian ran the new Mugen MGT7 from MMI Australia, with Xpert servos and Nitro-X fuel.
The final was intense at the front with Ian and young Jack Chun separated by under a second for the last 5 minutes. the gap at the flag six tenths !!
Top Five results:
Section: 1:8 IC GT - Race time: 30:00 - Mode: Groupstart - Track Condition: Dry - Starttime: 06.12.2015 14:45:02
Pos Nr. Pilot Nr Pilot I Laps Endtime Besttime Mediumtime Correction
1 4 24 Ian Haley 84 30:04.615 20.319 21.470
2 3 19 Jack Chun 84 30:05.268 20.337 21.249
3 5 18 Tak Woo 83 30:18.983 20.314 21.906
4 6 23 Paul Dutton 82 30:18.080 20.739 22.161
5 2 20 Michael Turner 53 30:07.516 19.831 34.341

Paper2

We already have the list body next year.