While I was racing last sat whenever I turned right on a particular turn I would either roll or the right wheels would lift. How would I correct that?

Slow down:D

Re: lay down throttle servo kit!
 

NIce

Check your track width, besides 200mm make sure left is the same as right from the center of the chassis. Also check your shock bladders make sure they are in good shape especially your left side.

I will check it out. Thanx.

If i was any slower I wouldn't be able to make it around the track before the time ran out :smile:

Tire Truer
 

Any idea if this Tire True is good?

Re: Tire Truer
 

The GQ one seems pretty nice

http://www.hjem.no/images/gq2801_2.jpg
http://www.hjem.no/images/gq2801_1.jpg
http://shop.radiostyrt.no/images/GQ-2801_200x160.jpg

A brand new fully automatic tire truer from GQ Products. This is by far the most advanced tire truer available on the market right now and if you compare the price to similar truers out there the price is a bargain!

Technical notes:


Regulated speed for fully automatic tire truing
Adjustable edge sanding
Tire width cutting adjustment
Adjustable diameter (40-80mm)
Truing angle 0 to 2 degrees
Wheels adapters for all 1/10 and 1/8 cars
Titanium nitrite coated cutting tool
Transparent protective cover
Collecting container for ground rubber
Tool/Wrench/Adapter holder
Automatic edge sanding:


This new Edge Sanding Feature enables you to safely true your foam tire edges.
You do not need to find an additional file to true your tire edges.
This makes the whole truing operation much safer.
Adjustable Tire Width to fit all classes tyre width
Adjustable Tire Diameter to fit all classes tyre diameter
Adjustable tire width:


The new Adjustable Tyre Width Feature enables you to easily adjust the width of the cutting area.
You do not have to wait for the time to travel to the end and return.
The new cutting adjustment is controlled by an easy-to-use operating handle.
This makes the whole truing operation much quicker and more flexible.

SQUARE SMR-6 64 Ti Hollow Mid Shaft
SQUARE SMR-17R 64 Ti Hollow 2-Speed Shaft

Re: Re: Tire Truer
 

This one feature I seem to like most: "Edge Sanding Feature"

NOW, this is what I call "AUTOMATIC".

G.QTire truer
 

I think you can get the G.QTire truer at [email protected]

What about the Integy Automatic one?

thanks eddiethefish for yhe part #

1) check you track with
2) Raise your rear roll center...
3) slow down a little, not much

You just have too much tracktion in the rear (cause of the tracktion roll), I would also try a stiffer set of srpings to reduce the roll. I hope this helps

traction in the rear will not cause traction roll..
tranction in the front does.

traction in the rear causes understeer.