Mugen MTX-3
Super Moderator
iTrader: (239)
Originally posted by gentleman81
are 5 ports better than 3 ports?
are 5 ports better than 3 ports?
Tech Master
iTrader: (2)
are 5 ports better than 3 ports?
3 ports is legal for ROAR races, but 5 posts are more powerful....
no always better
What brand cvd's are better?
Which would you recommend? RDL or 3racing? Others? I'm going to start with the front for now but I'll probably end up getting the rears too.
Super Moderator
iTrader: (239)
Re: What brand cvd's are better?
Originally posted by j240z
Which would you recommend? RDL or 3racing? Others? I'm going to start with the front for now but I'll probably end up getting the rears too.
Which would you recommend? RDL or 3racing? Others? I'm going to start with the front for now but I'll probably end up getting the rears too.
Tech Master
Re: Re: What brand cvd's are better?
Originally posted by Marcos.S710
"mugen"
"mugen"
Re: Re: New Laydown conversion set for MTX3
Originally posted by Sow&Steady
By Charge? I'm not familiar with this one, don't you have the one by Kai?
I'm interested!
By Charge? I'm not familiar with this one, don't you have the one by Kai?
I'm interested!
Charge makes a lot of special parts like manifold,pipes one-piece engine mount and more..
Originally posted by ilaybrk
what is this new fx engine 5 port or 3 port
what is this new fx engine 5 port or 3 port
http://shop.the-border.nl/customer/home.php?cat=481
thanks my luck I just bought A x 12 I should have weighted what is $50 more at that price
I need a good setup for The MTX-3 ... out door parkinglot track.
Any one??
Any one??
Originally posted by superk
I need a good setup for The MTX-3 ... out door parkinglot track.
Any one??
I need a good setup for The MTX-3 ... out door parkinglot track.
Any one??
Tech Master
iTrader: (2)
lay down servo/set up
does the laydown servo conversion kit put the servo in a bad position as far as being t boned by another car?
the mugen directions out of the box dont give you a good set up, any one with a good start off set up? i am also on a parkinglot set up track.
the mugen directions out of the box dont give you a good set up, any one with a good start off set up? i am also on a parkinglot set up track.
Tech Fanatic
iTrader: (1)
i race box stock setting in a parking lot except for the rear diff oil change, it pushed on power with the stock diff oil.
Tech Master
iTrader: (2)
what oil did you change to, and what was the result?
Tech Master
iTrader: (2)
what hop up brands or parts should you stay away from i see the 3racing handle breaks the upper deck and the cvds from them stink but do all 3racing parts suck or just some, the same question goes for shooter, sato, etc.
are all kawahara and mugen good parts?
going on a mtx3
are all kawahara and mugen good parts?
going on a mtx3