Mugen MTX-3
#9781
Tech Elite
iTrader: (2)
Originally posted by Manticore
oh yeah, i didnt know until you tell me about it !
i saw someone's signature it like
dont hate the people, its the product.
i bash on the product, you bash on me !
why are you so hate me stefan? are you really GPM or 3racing staff?
oh yeah, i didnt know until you tell me about it !
i saw someone's signature it like
dont hate the people, its the product.
i bash on the product, you bash on me !
why are you so hate me stefan? are you really GPM or 3racing staff?
If your car runs at 5km/hr, product quality is not a concern as the moving parts may just last forever.
In your case, product quality plays a major role !
#9782
Originally posted by ernestf
Manticore, one point to mark here.
If your car runs at 5km/hr, product quality is not a concern as the moving parts may just last forever.
In your case, product quality plays a major role !
Manticore, one point to mark here.
If your car runs at 5km/hr, product quality is not a concern as the moving parts may just last forever.
In your case, product quality plays a major role !
#9783
Originally posted by ernestf
Manticore, one point to mark here.
If your car runs at 5km/hr, product quality is not a concern as the moving parts may just last forever.
In your case, product quality plays a major role !
Manticore, one point to mark here.
If your car runs at 5km/hr, product quality is not a concern as the moving parts may just last forever.
In your case, product quality plays a major role !
#9785
Originally posted by ernestf
Oops ... don't get me wrong please. Even I make my assumption, I am still a die-hard GxM fans !
Oops ... don't get me wrong please. Even I make my assumption, I am still a die-hard GxM fans !
#9786
Guys, who makes titanium screw sets for the MTX-3.
#9787
Originally posted by MTX-3 Kid
Guys, who makes titanium screw sets for the MTX-3.
Guys, who makes titanium screw sets for the MTX-3.
#9788
Originally posted by EVOLUTION
They can only go up with me onboard !
They can only go up with me onboard !
#9789
Originally posted by dtm
Thats true.....you cannot go further down beyond the bottom of the barrel!!!
Thats true.....you cannot go further down beyond the bottom of the barrel!!!
#9790
Originally posted by EVOLUTION
Yes,you can go through the base.
Yes,you can go through the base.
#9791
Originally posted by Manticore
you could do that if you are a Ninja Evo !
you could do that if you are a Ninja Evo !
#9792
Originally posted by mtx3racer
anybody know of any other set ups besides stock and osaka's?
anybody know of any other set ups besides stock and osaka's?
I started off with the following:
Fr droop - 1 mm
Rr droop - 4 mm
Fr camber - 2 degrees
Rr camber - 3 degrees
Fr toe - 0.5 degree out
Rr toe - 3 degrees in
Springs - blue
Oil - 40 wt
Fr diff - 10,000 wt
Rr diff - 1,000 wt
Fr rollbar - flat
Rr roll bar - stock
The set up was nice enough for a small technical track, small as in about 100' x 50' (was more of an EP track).
#9793
Originally posted by Manticore
here you go stefan. I took your advice and bought a 3racing pulley. this pulley last for 3 weekend racing and approx a gallon of fuel. I think it will last another week or so.
check this out.
here you go stefan. I took your advice and bought a 3racing pulley. this pulley last for 3 weekend racing and approx a gallon of fuel. I think it will last another week or so.
check this out.
#9795
Originally posted by ernestf
no worry, man, i won't hate you, but will hate your car cause it just dust me !
no worry, man, i won't hate you, but will hate your car cause it just dust me !