Has anyone had this problem? :confused:

It is possible that your outdrive and dog bone pin has worn out.

I'd like to bolt in some big horse power. What engine do you recommend?

I'll check that,is it usually the front or back?

worn out outdrive causes dogbone blinding at the worn out area. either front or rear or both will cause this problem.

does anyone know if the mtx-2 front and rear suspension arms can be used on the mtx-3?

thanks

hopping rear end
 

it's usually caused by the springs at the rear being too hard, or maybe (but probably not) too much rear toe in.

raffaelli - just get one of those totally outlawed 5 ports like a Rody, MSPeed, JP BLack, L Collari or Masimo Fantini. After that have fun trying to drive it and repairing it, hehehe ...

alvinm - hopped as in jumpoing? The must be your rear shocks ... just not enough damping or springs too hard ... what springs you using and also when was the last time you build the shocks?

Cartman - nice ride ... its still new!!! give us a pic of it after say 2-3 months!!! hehehee ...

car is 4 months old there!!!

Cartman - YOU DA MAN!!! Hehehehe ...

Cartman - what is in the bumper? why are there wires from there? Thanks.

personal transponder!

Hey guys,

I just finished cleaning my car. I've noticed a lot of play in the rear dog bones. I mean...it goes in and out of the drive cups. I double check the instruction - didn't see any washers or rubber stoppers that I needed to install. Is this normal? It just looks very inefficient...I would imagine some power is lost because of this?

G

Use one piece of shock o-ring on the diff outdrive side to minimize play.