R/C Tech Forums - Mugen MTX-3

Looking at those side by side pictures makes you wonder why sedan foams are almost the same price? Go to Arrows site and compare them to Fast sedan tires.Running an 1/8 would almost be cheaper?

JordanC

11-20-2002 08:45 PM

Quote:

Originally posted by ilaybrk
hey tommy when are you going to make up last sunday rainout and does any body know what gasket to youse or were to get the part # for the pixxi 12 exhuast gasket the one for mt12 moter doesent fit well mine is torn

I thought they should fit. If not, OZDC and rjl run Rossi.... just ask them

JordanC

11-20-2002 08:52 PM

Quote:

Originally posted by tekrsq
When are the universals going to be available?

Does anybody know what material these new CV's are made of? Is the dogbone section the same as the standard ones, or thicker?

JordanC

11-20-2002 08:55 PM

Re: mrx 3 mtx 3

Quote:

Originally posted by prawntoe
mrx 3 mtx 3

Yep, they look similar alright..... It looks like in the pic you have your throttle servo mounted on top of the radio plate. It fits fine underneath and all the linkages line up better. Not to mention the lower COG.

jason102276

11-20-2002 10:08 PM

i finally got my kit this afternoon and im almost finished building ive got good news with the spacers used on mtx-2 behind the pin on axles the jaco 30mm tires and most likely all others will fit

JordanC

11-21-2002 01:48 AM

Quote:

Originally posted by jason102276
i finally got my kit this afternoon and im almost finished building ive got good news with the spacers used on mtx-2 behind the pin on axles the jaco 30mm tires and most likely all others will fit

How wide is the car though?

jason102276

11-21-2002 07:14 AM

i havent checked yet i figure its going to be a little narrow but most likely maybe a couple of mm i think and adjustment and a couple o rings could fix
otherwise what tires can you run i dont know where to get offset front wheels im going to have to mod it nomatter what
do the rest of your cars brakes bind mine are locked it seems like im going to have to sand the pads alot
wish i had a battery pack

Francis M.

11-21-2002 10:18 AM

hey robbie are you running at revalations(procar west race)
this sunday.

click, dublin

11-21-2002 11:14 AM

Tuned Pipe

Hi Guys,

Just got this from Mugen:

Hello

Thank you for your e-mail.

Yes, the MTX-3 kits has the manifold but the pipe is not included.

We have our office in Germany, so could you please contact with them?

MID MUGEN SEIKI Mod. -Vertr. GmbH
Tel: +49 209 40 833-31 / -39
Fax:+49 209 40 833-09
http://www.mid-mugen.de
e-mail: [email protected]

Thank you for your cooperation.
Best regards
MUGEN SEIKI CO., LTD.

patelladragger

11-21-2002 11:30 AM

Quote:

Originally posted by Craig
Looking at those side by side pictures makes you wonder why sedan foams are almost the same price? Go to Arrows site and compare them to Fast sedan tires.Running an 1/8 would almost be cheaper?

cheaper on tires...maybe....engines....not even close.

ant	11-21-2002 01:33 PM

Quote:

i run a collari witch is picco based you need to get a picco
gasket and header pipe as thay have a smaller diamiter
header:cry:

Cartman

11-21-2002 02:02 PM

Re: Re: Re: No tuned pipe

Quote:

Originally posted by ROBBIE C
The kits that are sold in the US come with motor pipe & manifold.
Looks like the kits from other countries don't come with the pipe.
If you don't have a pipe you'll have to contact the company that the kit was purchased from.:(

HELLO ANY ONE LISTENING?

MY KIT HAD A PIPE, AND OTHERS IN THE UK SO THEY SHOULD BE THERE!!!!

All times are GMT -7. It is currently 12:19 PM.

Page 46 of 1150

Show 40 post(s) from this thread on one page