Mugen MTX-3
#5011
Re: question re clutch
Originally posted by eddiethefish
Hello,
When to opt for the stock clutch, the gray, or the red one? Of course one if softer than the other, and I'd just like to know of when to pick which one to choose.
Thanks in advance,
eddie
Hello,
When to opt for the stock clutch, the gray, or the red one? Of course one if softer than the other, and I'd just like to know of when to pick which one to choose.
Thanks in advance,
eddie
#5012
Tech Fanatic
Originally posted by eddiethefish
Ka Alu. Engine Brace
Ka Alu. Cross menber
Mu Hex Drive washers
Ka Alu center belt block
Sq Alu front sway bar holder
Mu Front CVDs
Mu Rear CVDs
Ka Adj Rear Anti Roll bar
Ka 4mm chassis
FiveStars Alu engine mount
Ka Alu Center radio plate support
Mu Super hard clutch spring
Mu Gray clutch shoe
3R Lightened fly weights
Zac heatsink
Mu Teflon Brake pad
Team Active ventilated/cut brake discs
Sq Titanium middle shaft
Sq Titanium main shaft
FiveStars Ti coated Shock shafts
Sq Teflon Shock Plate 1-hole and 2-hole
Sq Shock plate
Sq Shock adjusting ring
Hashimoto Rx graphite plate
Ka Negative Diff
Ka al bulk stiffener and Graphite Body post Tower 2nd Edition
Sq brake lever
Sq Delrin and Alu Knuckle nuts.
Sq bumper
etc.... I'm tired now , see the pictures for more info...
Ka Alu. Engine Brace
Ka Alu. Cross menber
Mu Hex Drive washers
Ka Alu center belt block
Sq Alu front sway bar holder
Mu Front CVDs
Mu Rear CVDs
Ka Adj Rear Anti Roll bar
Ka 4mm chassis
FiveStars Alu engine mount
Ka Alu Center radio plate support
Mu Super hard clutch spring
Mu Gray clutch shoe
3R Lightened fly weights
Zac heatsink
Mu Teflon Brake pad
Team Active ventilated/cut brake discs
Sq Titanium middle shaft
Sq Titanium main shaft
FiveStars Ti coated Shock shafts
Sq Teflon Shock Plate 1-hole and 2-hole
Sq Shock plate
Sq Shock adjusting ring
Hashimoto Rx graphite plate
Ka Negative Diff
Ka al bulk stiffener and Graphite Body post Tower 2nd Edition
Sq brake lever
Sq Delrin and Alu Knuckle nuts.
Sq bumper
etc.... I'm tired now , see the pictures for more info...
yep but how much does it weigh?
#5013
Tech Master
Originally posted by Varuth
I need an engine that last forever without changing con rod
I need an engine that last forever without changing con rod
#5014
Re: Re: question re clutch
Originally posted by kevink2
Eddie, a lot of us at Rev. have been using the Delta Red, with the super hard clutch spring and lightened flyweights.
Eddie, a lot of us at Rev. have been using the Delta Red, with the super hard clutch spring and lightened flyweights.
#5015
Originally posted by Cartman
yep but how much does it weigh?
yep but how much does it weigh?
I never weigh my car, since I don't race. Do I care about the weight? Nah... I just wanna run and run and run the car.
#5016
Originally posted by tekrsq
Eddie,
Speedline carries them as well. Also, whoever sells Delta parts should be able to get it. If memory serves me, it's just a rebadged Delta shoe anyway. I run them in my cars, they're very nice!!!
Eddie,
Speedline carries them as well. Also, whoever sells Delta parts should be able to get it. If memory serves me, it's just a rebadged Delta shoe anyway. I run them in my cars, they're very nice!!!
Got a URL for Speedline?
Thanks,
eddie
#5017
Can I get the Audi S4 intsead kakakkkaa
#5018
Originally posted by Manticore
yeah, its 363
yeah, its 363
KK-784 for the Pulley --> you don't need this, get Mugen's one.
KK-785 Conversion belt --> haven't measure if it's 363.
#5019
Eddie,
I see a problem with your car on the left it has no wheels
No really nice looking cars! Good to see people taking care of there rc cars has does your real car look? as good as condition as your RC cars?
I see a problem with your car on the left it has no wheels
No really nice looking cars! Good to see people taking care of there rc cars has does your real car look? as good as condition as your RC cars?
#5020
Originally posted by TBR
Eddie,
I see a problem with your car on the left it has no wheels
No really nice looking cars! Good to see people taking care of there rc cars has does your real car look? as good as condition as your RC cars?
Eddie,
I see a problem with your car on the left it has no wheels
No really nice looking cars! Good to see people taking care of there rc cars has does your real car look? as good as condition as your RC cars?
The reason you don't see the tires on the left car is that I always take off the foam tires and store them away from sunlight, in a sealed box with a big bag of dessicant. I don't have and stock many tires, so just wanna give'em a good care.
Last edited by eddiethefish; 06-09-2003 at 06:01 PM.
#5021
Originally posted by eddiethefish
Ka Alu. Engine Brace
Ka Alu. Cross menber
Mu Hex Drive washers
Ka Alu center belt block
Sq Alu front sway bar holder
Mu Front CVDs
Mu Rear CVDs
Ka Adj Rear Anti Roll bar
Ka 4mm chassis
FiveStars Alu engine mount
Ka Alu Center radio plate support
Mu Super hard clutch spring
Mu Gray clutch shoe
3R Lightened fly weights
Zac heatsink
Mu Teflon Brake pad
Team Active ventilated/cut brake discs
Sq Titanium middle shaft
Sq Titanium main shaft
FiveStars Ti coated Shock shafts
Sq Teflon Shock Plate 1-hole and 2-hole
Sq Shock plate
Sq Shock adjusting ring
Hashimoto Rx graphite plate
Ka Negative Diff
Ka al bulk stiffener and Graphite Body post Tower 2nd Edition
Sq brake lever
Sq Delrin and Alu Knuckle nuts.
Sq bumper
etc.... I'm tired now , see the pictures for more info...
Ka Alu. Engine Brace
Ka Alu. Cross menber
Mu Hex Drive washers
Ka Alu center belt block
Sq Alu front sway bar holder
Mu Front CVDs
Mu Rear CVDs
Ka Adj Rear Anti Roll bar
Ka 4mm chassis
FiveStars Alu engine mount
Ka Alu Center radio plate support
Mu Super hard clutch spring
Mu Gray clutch shoe
3R Lightened fly weights
Zac heatsink
Mu Teflon Brake pad
Team Active ventilated/cut brake discs
Sq Titanium middle shaft
Sq Titanium main shaft
FiveStars Ti coated Shock shafts
Sq Teflon Shock Plate 1-hole and 2-hole
Sq Shock plate
Sq Shock adjusting ring
Hashimoto Rx graphite plate
Ka Negative Diff
Ka al bulk stiffener and Graphite Body post Tower 2nd Edition
Sq brake lever
Sq Delrin and Alu Knuckle nuts.
Sq bumper
etc.... I'm tired now , see the pictures for more info...
A lot more for me to go, i am catching up.. hehee
#5022
Originally posted by RClover
damn..you stole my show!
A lot more for me to go, i am catching up.. hehee
damn..you stole my show!
A lot more for me to go, i am catching up.. hehee
#5023
Originally posted by RClover
damn..you stole my show!
A lot more for me to go, i am catching up.. hehee
damn..you stole my show!
A lot more for me to go, i am catching up.. hehee
#5024
repost my car again !
Last edited by Manticore; 06-09-2003 at 06:20 PM.
#5025
Originally posted by eddiethefish
But, well guess you'll never catch me up, since by next two weeks the car on the right will be converted to LOLA w/ AIP MTX-3 Floating Mount and Kawahara Lola Conversion. Sorry to you in advance
But, well guess you'll never catch me up, since by next two weeks the car on the right will be converted to LOLA w/ AIP MTX-3 Floating Mount and Kawahara Lola Conversion. Sorry to you in advance