Mugen MTX-4
04-06-2007, 01:16 AM
#8072
Originally Posted by TomB
rcfoolz and other mugen drivers. mount your pipe mount on the top of the top deck, this will eliminate any issues of the pipe spring touching.
see attached pic
even with a massive hit, it can never hit the pulley, as the spring section is above it now.
see attached pic
even with a massive hit, it can never hit the pulley, as the spring section is above it now.
In RC racing ALL things are possible!
04-06-2007, 04:28 PM
#8074
Originally Posted by deviltires
does anyone else has this problem my clutchbell rubs against my 2 speed housing if so how do i fix that
i just let mine hit till it worn out and not hit anymore
04-08-2007, 06:30 AM
#8075
Tech Regular
iTrader: (1)
need and mtx4
I am looking to take your mtx4 off of your hands. I would like it to be in excellent shape as if you would be proud to sell the car to your brother. Extra parts are a bonus and I would like to take an engine off of your hands as well...something with less than a half a gallon on it. I would like a new body, too.
I am looking to get back into racing on road.
Pm me or send me an email at [email protected]. Pic please!!
Thanks a million!!!
Mike
I am looking to get back into racing on road.
Pm me or send me an email at [email protected]. Pic please!!
Thanks a million!!!
Mike
04-08-2007, 02:11 PM
#8076
build
im on the build look out
04-09-2007, 05:55 PM
#8077
04-10-2007, 01:40 AM
#8078
hey guys does anyone know if there is a thrust bearing available for the clutches that is like the xray diff thrust bearings? ie the balls are encapsulated in a solid housing, as oposed to a rolled "sheet"type bearing like the current thrustbearings.
i've noticed that when my mate set his clutch gap up how the kyosho instructions stated, it wore out the thrust bearing alot quicker. the xray style thrust seems to be alot stronger and hold a large load better.
like this one
i've noticed that when my mate set his clutch gap up how the kyosho instructions stated, it wore out the thrust bearing alot quicker. the xray style thrust seems to be alot stronger and hold a large load better.
like this one
04-10-2007, 07:27 AM
#8079
04-10-2007, 11:34 AM
#8080
Originally Posted by rmdhawaii
Wasn't happy about a few things, and it had nothing to do with the car, the car was awsome all around, and my(now somebody else's) car has so many prototype parts on it, the only thing stock is the arms, uprights, and rear bulkheads.
04-11-2007, 03:41 AM
#8081
So what gives with the new 2 degree knuckles?
04-11-2007, 04:18 PM
#8082
Lowering CG with a new Mod FREE PART
Well, here is the last part that I've made for the MTX-4......I was trying to get these produced before now, but the person who I want to do the work is too busy at the time, but in the future, hopefully.
This is a carbon fiber batter tray that lowers the batteries 2mm......this will place the batteries .3mm from being flush with the bottom of the chassis. At the time, there is only 5 made and I will give one away on monday. anybody who would like to be put in the drawing for one, please email only once at [email protected]. When produced, the cost I'll trying to keep at or below $10 shipped, (in the US).......When you email me, just say "yes" or "NO" in the email if you would purchase one when they are produced. I won't pass your information along, but I will use your information as to how many parts I need to have produced as it will only be ran 1 time.
I will contact the winner with a reply email and will also post the person(s) name as to who won Only enter your email once, as I might just go ahead and give 2 or 3 away! And to be fair, I will also post the name(s) or screen-name of the persons who receive the part.
Oh, to get the full benefit of this part, when shipped, it will contain instructions on how to mod the car to get the CG down lower.
This is a carbon fiber batter tray that lowers the batteries 2mm......this will place the batteries .3mm from being flush with the bottom of the chassis. At the time, there is only 5 made and I will give one away on monday. anybody who would like to be put in the drawing for one, please email only once at [email protected]. When produced, the cost I'll trying to keep at or below $10 shipped, (in the US).......When you email me, just say "yes" or "NO" in the email if you would purchase one when they are produced. I won't pass your information along, but I will use your information as to how many parts I need to have produced as it will only be ran 1 time.
I will contact the winner with a reply email and will also post the person(s) name as to who won Only enter your email once, as I might just go ahead and give 2 or 3 away! And to be fair, I will also post the name(s) or screen-name of the persons who receive the part.
Oh, to get the full benefit of this part, when shipped, it will contain instructions on how to mod the car to get the CG down lower.
04-12-2007, 03:41 AM
#8083
Hey everyone !
I'm new to the forum !
Just got my first rc car , i bought the mtx4 and almost finished to build it
dayam , looks like im going to be very addicted to this hooby
I'm new to the forum !
Just got my first rc car , i bought the mtx4 and almost finished to build it
dayam , looks like im going to be very addicted to this hooby
04-12-2007, 07:10 PM
#8085
Originally Posted by vlp
Hey everyone !
I'm new to the forum !
Just got my first rc car , i bought the mtx4 and almost finished to build it
dayam , looks like im going to be very addicted to this hooby
I'm new to the forum !
Just got my first rc car , i bought the mtx4 and almost finished to build it
dayam , looks like im going to be very addicted to this hooby
http://www.nitrokb.com/mtx4/