Kyosho v-one rrr
06-10-2007, 09:24 AM
#9377
does anyone has part number of 2D Weight of VZW222 Clutch?
06-10-2007, 04:30 PM
#9378
hey, I have been playing around with one, found it worked great on big flowing track. but on our club track thats kind of tight I would pick up a bad mid corner push in the tight stuff but on the fast sweepers the car was great.only problem 90% the track is tight, maybe if there was a thicker fluid one could run it might free the car up some.
06-11-2007, 12:46 AM
#9379
06-11-2007, 12:47 AM
#9380
06-11-2007, 01:20 AM
#9381
06-11-2007, 03:08 AM
#9382
Tech Elite
It was very long i didn't even read this V1RRR thread. Suprise me most of you still here sharing the experience. My V1RRR was converted to V1RRR Evo and then sold to a friend. Now i bought a brand new V1RRR Evo kit back again instead replacing old parts to a new one. And i just start to love setting the car relatively to the track condition and layout. The car is good the only thing to work with is the throttle speed and the consistency. ( Driving skill + good engine speed). 
06-11-2007, 04:44 AM
#9383
front spool - kawahara??
hey guys im looking for the best spool combination for the rrr
currently im using the front diff case with the lock converter inside. its very durable but i have to grind down diff cases for it to fit.
what is the best aftermarket one to use? i tried the kyosho one that was released at the worlds but it didnt last long at all and stripped out the outdrives.
the kawahara and k-factory ones look real good, what are peoples opinions on thesE?
thanks
John
currently im using the front diff case with the lock converter inside. its very durable but i have to grind down diff cases for it to fit.
what is the best aftermarket one to use? i tried the kyosho one that was released at the worlds but it didnt last long at all and stripped out the outdrives.
the kawahara and k-factory ones look real good, what are peoples opinions on thesE?
thanks
John
06-11-2007, 07:51 AM
#9384
the kfactory has a great design but in my opnion is over priced.. have you seen the km group one?
http://www.km-rc.com/oscommerce/cata...929a2a0d9cce1b
i will get one soon, price is far better then kfactory and quality is race proven
have never seen kawahara one
http://www.km-rc.com/oscommerce/cata...929a2a0d9cce1b
i will get one soon, price is far better then kfactory and quality is race proven
have never seen kawahara one
06-11-2007, 06:51 PM
#9387
i was wondering exactly the same thing
looking at picture the cup joint is shorter then kyosho one
better ask them for replacement before buy
looking at picture the cup joint is shorter then kyosho one
better ask them for replacement before buy
06-12-2007, 01:35 AM
#9388
It was very long i didn't even read this V1RRR thread. Suprise me most of you still here sharing the experience. My V1RRR was converted to V1RRR Evo and then sold to a friend. Now i bought a brand new V1RRR Evo kit back again instead replacing old parts to a new one. And i just start to love setting the car relatively to the track condition and layout. The car is good the only thing to work with is the throttle speed and the consistency. ( Driving skill + good engine speed).
gald that u are back here sharing ur new car...
06-14-2007, 07:09 AM
#9389
side to side free play in 2 speed shaft?
hi
i have always had an issue with the side to side movement in my 2 speed shaft. have you guys had to shim this? i found that by placing some shims between the brake disk holder and pinion gear the slop gets minimal but no one else that has a rrr at my track has had to do t his..weird i think?
i have always had an issue with the side to side movement in my 2 speed shaft. have you guys had to shim this? i found that by placing some shims between the brake disk holder and pinion gear the slop gets minimal but no one else that has a rrr at my track has had to do t his..weird i think?
06-14-2007, 07:35 AM
#9390
Kyosho RRR
hi
i have always had an issue with the side to side movement in my 2 speed shaft. have you guys had to shim this? i found that by placing some shims between the brake disk holder and pinion gear the slop gets minimal but no one else that has a rrr at my track has had to do t his..weird i think?
i have always had an issue with the side to side movement in my 2 speed shaft. have you guys had to shim this? i found that by placing some shims between the brake disk holder and pinion gear the slop gets minimal but no one else that has a rrr at my track has had to do t his..weird i think?