Kyosho v-one rrr
#4801
Originally Posted by joemugen
whats up jeff. what do you think so far between the rrr and the mtx-4. basically, no advantage to having either one over the other???
#4802
Tech Regular
iTrader: (3)
Originally Posted by AndyT ©
Are you using offset wheels....these should take the trackwidth to 200mm
Cheers
Cheers
#4803
Originally Posted by psbarger
So are you saying you need offset wheels for the RRR WCE to make 200mm width? I just got my car mostly built tonight, and I'm entirely new to nitro on road. I was just going to order some tires to get a start on the summer, but I want to order the right tires. Offset wheels or no?
#4805
Has anyone tried any of the K-factory parts for the rrr......Also any you guys gonna run rrr at the w-nats
#4806
Originally Posted by robert maestrey
Has anyone tried any of the K-factory parts for the rrr......Also any you guys gonna run rrr at the w-nats
#4807
you mean the team drivers
#4808
Originally Posted by JustRace
The fast guys are running the 710
#4809
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
For my rears since my LHS doen't carry 2deg offset rims, I just put a 1mm shim between the hex and rim. That is very close to the 2deg.
#4810
Tech Elite
iTrader: (15)
broken clutch bearing
has anyone boke the bearings that sit at the front of the clutch bell between the clutch shims ? im talking about the thin exposed bearing right at the front.
ive manages to break 2 already.. i used to run the beraing dry but yesterday i was advised to run them with a drop of oil so ill see how it goes now
ive manages to break 2 already.. i used to run the beraing dry but yesterday i was advised to run them with a drop of oil so ill see how it goes now
#4811
Tech Addict
iTrader: (1)
Originally Posted by mrgsr
has anyone boke the bearings that sit at the front of the clutch bell between the clutch shims ? im talking about the thin exposed bearing right at the front.
ive manages to break 2 already.. i used to run the beraing dry but yesterday i was advised to run them with a drop of oil so ill see how it goes now
ive manages to break 2 already.. i used to run the beraing dry but yesterday i was advised to run them with a drop of oil so ill see how it goes now
Check that there is about 0.15mm endplay on the clutchbell, you may have to many shims installed or maybe not enough.
If you are not sure about building the clutch than go and read Josh Cryuls Centrifugal Clutch Assembly & Tuning 101 and it will give you a good basis work from.
#4812
Originally Posted by JustRace
The fast guys are running the 710
Your absolutely correct sir.......RRR is slow
#4813
Originally Posted by rocca30
you mean the team drivers
Humans....fellas......gals......people
#4814
Originally Posted by markp27
Shoo, shoo, Bro Lee Wonder what car you'll be running
#4815
Originally Posted by robert maestrey
Your absolutely correct sir.......RRR is slow