Capricorn LAB C801 1/8 scale
#526
Tech Elite
Over the last few weeks I have been getting racers asking for my set-up. I will post it here as well for everyone that wants to see it.
DJ Apolaro
DJ Apolaro
#527
#528
Tech Initiate
Thanks DJ
Also what "flex" you use with the C801 ?
I have a C02 and a C801
G
Also what "flex" you use with the C801 ?
I have a C02 and a C801
G
#529
#530
Tech Initiate
(Over the last few weeks I have been getting racers asking for my set-up. I will post it here as well for everyone that wants to see it.)
Thanks for posting this, what type of tracks is this set up being used on !
Andy
Thanks for posting this, what type of tracks is this set up being used on !
Andy
#531
Tech Elite
#532
Tech Elite
I have been using the stock. I tried the Optional one's that are with the Euro kit and for me the car is not as smooth through the corner. I ended up shimming the optionals to the same height as the stocks. LOL
I have ran it on 5 different tracks. Homestead, Fort Myers, Arcadia, Kissimmee and Chaplin. I would say from Medium to super high bite and all with the same set-up. My car has felt good on all tracks and I just change little things like caster, toe, camber. Nothing major though.
DJ Apolaro
DJ Apolaro
#533
Tech Initiate
Rear Bulkhead
Another question, as just starting to build this car, is the rear bulkhead B an optional upgrade or in the kit, if its an up-grade what part number is it.
Andy
Andy
#534
Tech Elite
#536
Tech Elite
It is 1.5 on each side or 3 total.
DJ
DJ
#540