Serpent 710
#5341
Tech Champion
iTrader: (17)
I don't know this is a better solution for those who cannot get in touch with the Serpent shock tower as a replacement........you can buy 2 3racings shock towers from EBAY/DINBALL.........I think for the price of 2, is a little bit less then one stock tower from Serpent (I believed they are $40 from Serpent each)....
On top of that..........you can pick the SSG version for ALL SHOW and NO GO route. I usually won't recomment 3rd market parts for Serpent, but shock towers is not something that important, also, the price of 2 to 1, it is a bargain.
What is odd is....they have only 2 shock positions....why? and what happened to the rest?
On top of that..........you can pick the SSG version for ALL SHOW and NO GO route. I usually won't recomment 3rd market parts for Serpent, but shock towers is not something that important, also, the price of 2 to 1, it is a bargain.
What is odd is....they have only 2 shock positions....why? and what happened to the rest?
Last edited by Rookie Solara; 03-05-2004 at 11:01 AM.
#5342
Originally posted by crashed_1
But he has revealed himself to the forum...just give a wild guess...
*clue #2*
the person close to a serpent.
But he has revealed himself to the forum...just give a wild guess...
*clue #2*
the person close to a serpent.
This is a woman, who dresses up as a man, but only in polka dots, has hairy legs, a moustache, a big beer belly and likes messing about with snakes..... Well, if I met a woman like that
#5343
Originally posted by rayhuang
HOw has the tire wear been on the 710 on prepared and unprepared asphalt tracks?
also what shore has been working fr and rr?
Also-more specifically-has it been wearing front or rear pretty evenly-or all front or all back. And this is in 5 minute qualifers and 20 minute mains.
Thanks for the answers guys,
Ray
HOw has the tire wear been on the 710 on prepared and unprepared asphalt tracks?
also what shore has been working fr and rr?
Also-more specifically-has it been wearing front or rear pretty evenly-or all front or all back. And this is in 5 minute qualifers and 20 minute mains.
Thanks for the answers guys,
Ray
http://www.rctech.net/forum/showthre...231#post739231
Cheers, Mark.
#5344
710 FAQ
Weekly update. WOW! You guys have been writing too much this week - maybe I was involved in there, too
Took a little longer to compile due to me dedicating time to building my 710
Here you go - please give comments if you feel something should be imporved.
Cheers, Mark.
Took a little longer to compile due to me dedicating time to building my 710
Here you go - please give comments if you feel something should be imporved.
Cheers, Mark.
#5345
Originally posted by Rookie Solara
As much as I like that...(because I have one) that setup station are NO LONGER working with the 710 because the rear uprights (the top pivot ball area that you will adjust your rear camber)of the 710 sit up HIGH and the Integy setup block DOES NOT have the opening for you to adjust the upper pivot balls thru the setup block...so you can only use the L-shape stock allen wrentch to setup your camber or you setup the camber with the setup block.
And somehow....HUDY one has a circle opening for you to adjust the 710 even thought that HUDY setup station is out almost 5 years already....
I bet Serpent designed the 710 rear uprights for some reason that only HUDY setup will work.
As much as I like that...(because I have one) that setup station are NO LONGER working with the 710 because the rear uprights (the top pivot ball area that you will adjust your rear camber)of the 710 sit up HIGH and the Integy setup block DOES NOT have the opening for you to adjust the upper pivot balls thru the setup block...so you can only use the L-shape stock allen wrentch to setup your camber or you setup the camber with the setup block.
And somehow....HUDY one has a circle opening for you to adjust the 710 even thought that HUDY setup station is out almost 5 years already....
I bet Serpent designed the 710 rear uprights for some reason that only HUDY setup will work.
Sorry Rookie, I see Proficar has already answered this.
Last edited by Diesel Racer; 03-05-2004 at 12:23 PM.
#5346
Originally posted by Rookie Solara
As much as I like that...(because I have one) that setup station are NO LONGER working with the 710 because the rear uprights (the top pivot ball area that you will adjust your rear camber)of the 710 sit up HIGH and the Integy setup block DOES NOT have the opening for you to adjust the upper pivot balls thru the setup block...so you can only use the L-shape stock allen wrentch to setup your camber or you setup the camber with the setup block.
And somehow....HUDY one has a circle opening for you to adjust the 710 even thought that HUDY setup station is out almost 5 years already....
I bet Serpent designed the 710 rear uprights for some reason that only HUDY setup will work.
As much as I like that...(because I have one) that setup station are NO LONGER working with the 710 because the rear uprights (the top pivot ball area that you will adjust your rear camber)of the 710 sit up HIGH and the Integy setup block DOES NOT have the opening for you to adjust the upper pivot balls thru the setup block...so you can only use the L-shape stock allen wrentch to setup your camber or you setup the camber with the setup block.
And somehow....HUDY one has a circle opening for you to adjust the 710 even thought that HUDY setup station is out almost 5 years already....
I bet Serpent designed the 710 rear uprights for some reason that only HUDY setup will work.
#5347
Re: 710 FAQ
Originally posted by markp27
Weekly update. WOW! You guys have been writing too much this week - maybe I was involved in there, too
Weekly update. WOW! You guys have been writing too much this week - maybe I was involved in there, too
#5349
I think Julius mentioned it an o so many posts ago. but to use the hudy setupsystem you'll need to make extra holes for the rear upright to align to make the adjustments for camber.
#5351
Tech Champion
iTrader: (17)
Originally posted by Profoxcg
my hudy station does not work with the 710 rear uprights. I bought the universal one, did I get the wrong one? someone please tell me the right part number.
my hudy station does not work with the 710 rear uprights. I bought the universal one, did I get the wrong one? someone please tell me the right part number.
Hmmm, that mean another update from HUDY just for S710 is coming?
#5352
Tech Champion
iTrader: (17)
Originally posted by clmbia45
I adjust my camber without removing anything, using a Hudy 2.5 mm ball-tipped driver. So if Serpent and Hudy conspired to prevent the Integy set-up station from being used, they're not only sneaky, they're incompetent.
I adjust my camber without removing anything, using a Hudy 2.5 mm ball-tipped driver. So if Serpent and Hudy conspired to prevent the Integy set-up station from being used, they're not only sneaky, they're incompetent.
#5353
Don't think Hudy has them allready. Just read the following thread on mytsn for some more info.
http://www.mytsn.com/forums/forum.as...56&sm=0&fi=126
http://www.mytsn.com/forums/forum.as...56&sm=0&fi=126
#5354
Tech Champion
iTrader: (17)
Originally posted by Profoxcg
my hudy station does not work with the 710 rear uprights. I bought the universal one, did I get the wrong one? someone please tell me the right part number.
my hudy station does not work with the 710 rear uprights. I bought the universal one, did I get the wrong one? someone please tell me the right part number.
I think drilling a big enough hole will clear the problem, at least HUDY is plastic compare to Integy (alum )...
#5355
Tech Champion
iTrader: (17)
Originally posted by Herbie
Don't think Hudy has them allready. Just read the following thread on mytsn for some more info.
http://www.mytsn.com/forums/forum.as...56&sm=0&fi=126
Don't think Hudy has them allready. Just read the following thread on mytsn for some more info.
http://www.mytsn.com/forums/forum.as...56&sm=0&fi=126