Serpent 710
10-20-2004, 04:52 AM
Thanks D for your response
I do have the 2.5mm install is 2.5mm inside the ball (stiffer)
I have the new MID position that will change from LT to mid position before LB, I might use this change to see.
I do need more on power steering
I am already using the new servo saver and it works beautiful. I have Shorten the lower from arm to 1mm but have not installed it jet.
Originally posted by InitialD
Try and use the new harder 2.5 mm sway bar. It should work good with oneway or front ball diff. You may want to adjust the front sway bar to harder to take out steering and balance the car.
Try and use the new harder 2.5 mm sway bar. It should work good with oneway or front ball diff. You may want to adjust the front sway bar to harder to take out steering and balance the car.
[i] If the rear swings out a little, try UTI / LB. If you want the car to react faster left to right, use NO shims under the front upper arms..[/B]
I have the new MID position that will change from LT to mid position before LB, I might use this change to see.
[i] To get more on power steering, you may want to try less rear toe in like +1.5 or even +1.[/B]
[i]And yes, don't forget to try the new servo saver if you have it. Good for high speed sweepers. [/B]
I am already using the new servo saver and it works beautiful. I have Shorten the lower from arm to 1mm but have not installed it jet.
10-20-2004, 06:38 AM
Re: Re: [size=4]New build for 710[/size]
Originally posted by InitialD
Well, one thing about that old "Tech Elite" you're referring to did not get the latest 710 kit. Our friend the ever hip Uncle Crash (another Tech Elite) did up one last week with a new batch of the 710 and check out what he found in the kit;
1. Rear shocktower with old design (gives you opportunity to throw it back to Serpent
)
2. New Diff clamp for rear diff
3. Additional 1.2mm shock pistons on top of stock 1.0 mm ones
4. Additional 0.5mm spacers for front roll center
5. Old lower rear arms...
6. Reinforced upper and lower bumper brace
7. Black anodised flywheel
Well, one thing about that old "Tech Elite" you're referring to did not get the latest 710 kit. Our friend the ever hip Uncle Crash (another Tech Elite) did up one last week with a new batch of the 710 and check out what he found in the kit;
1. Rear shocktower with old design (gives you opportunity to throw it back to Serpent
)2. New Diff clamp for rear diff
3. Additional 1.2mm shock pistons on top of stock 1.0 mm ones
4. Additional 0.5mm spacers for front roll center
5. Old lower rear arms...
6. Reinforced upper and lower bumper brace
7. Black anodised flywheel
BTW, u sure about the 0.5mm spacers for the fr roll ctr? Too thin no?
I have that black anodised flywheel and I really like it ... smooth engagements and when you service all you need to do is wipe it with your thumbs and its back to a polish finish!
10-20-2004, 06:39 AM
Re: Re: Re: [size=4]New build for 710[/size]
Originally posted by crashed_1
Ummm...correction to item no. 4. It's actually Imm spacers plus the original 2mm ones.
Ummm...correction to item no. 4. It's actually Imm spacers plus the original 2mm ones.
10-20-2004, 06:40 AM
Originally posted by markp27
Hey Crashed, great video - more please
Hmmm and what was the Prophet's car doing mixing it with the Lolitas?
Hey Crashed, great video - more please
Hmmm and what was the Prophet's car doing mixing it with the Lolitas?
10-20-2004, 06:42 AM
Re: Winternats Markp27
Originally posted by 840918001
Hi Mark,
I have read that you're going to race the winternats.
That's great man, the best way to improve your skills is due to drive against all the topguns.
Go there with a new Mega, maybe the team can tune it for you
Good luck there, and enjoy yourself!
Bye Thomas
Hi Mark,
I have read that you're going to race the winternats.
That's great man, the best way to improve your skills is due to drive against all the topguns.
Go there with a new Mega, maybe the team can tune it for you
Good luck there, and enjoy yourself!
Bye Thomas
10-20-2004, 07:06 AM
Tech Regular
Re: Re: Winternats Markp27
Originally posted by Sow&Steady
What about yourself? Are you going to be there?
What about yourself? Are you going to be there?
No, I'll be running the indoor elecric nationals then here in the Netherlands.
Bye Thomas
10-20-2004, 07:14 AM
Re: Re: Re: Winternats Markp27
Originally posted by 840918001
Hi,
No, I'll be running the indoor elecric nationals then here in the Netherlands.
Bye Thomas
Hi,
No, I'll be running the indoor elecric nationals then here in the Netherlands.
Bye Thomas
10-20-2004, 07:21 AM
Tech Regular
Re: Re: Re: Re: Winternats Markp27
Originally posted by Sow&Steady
Ah, forget the EP, go nitro man!
Ah, forget the EP, go nitro man!
I race Nitro all season long and in the winter I race EP, and a few indoor Nitro races.
I will give Salven a change, by not coming to that race
Bye Thomas
10-20-2004, 07:36 AM
Re: Re: Re: Re: Re: Winternats Markp27
Originally posted by 840918001
Hi,
I race Nitro all season long and in the winter I race EP, and a few indoor Nitro races.
I will give Salven a change, by not coming to that race
Bye Thomas
Hi,
I race Nitro all season long and in the winter I race EP, and a few indoor Nitro races.
I will give Salven a change, by not coming to that race
Bye Thomas
10-20-2004, 07:40 AM
Tech Regular
Re: Re: Re: Re: Re: Re: Winternats Markp27
Originally posted by Sow&Steady
Ah right. Ah well, maybe you'll come to the Euros in 05 then ...
Ah right. Ah well, maybe you'll come to the Euros in 05 then ...
I'll be at the 2005 Euro's.
My teammate was 2nd at the Dutch nationals so he will race there and I'll be therer with him.
Bye Thomas
10-20-2004, 07:59 AM
Suspended
i cannot wait to go...choco
10-20-2004, 08:18 AM
Re: Re: Re: Re: Re: Re: Re: Winternats Markp27
Originally posted by 840918001
Hi,
I'll be at the 2005 Euro's.
My teammate was 2nd at the Dutch nationals so he will race there and I'll be therer with him.
Bye Thomas
Hi,
I'll be at the 2005 Euro's.
My teammate was 2nd at the Dutch nationals so he will race there and I'll be therer with him.
Bye Thomas
10-20-2004, 08:19 AM
Originally posted by SERPENTFREAK69
i cannot wait to go...choco
i cannot wait to go...choco
10-20-2004, 09:01 AM
Servo Saver
I am going to install the new (longer) servo saver lever this weekend and just wanted to know if there were any special modifications I will need to make or do I just install it like the original?
Thanks
Thanks
10-20-2004, 09:31 AM
Re: Servo Saver
Originally posted by jag
I am going to install the new (longer) servo saver lever this weekend and just wanted to know if there were any special modifications I will need to make or do I just install it like the original?
Thanks
I am going to install the new (longer) servo saver lever this weekend and just wanted to know if there were any special modifications I will need to make or do I just install it like the original?
Thanks