Serpent 710
09-04-2004, 12:28 PM
Originally posted by Sow&Steady
No ... sony-erikson
No ... sony-erikson
09-04-2004, 12:28 PM
Originally posted by markp27
...
Funny you should mention that, I've heard that there are no more FXs anywhere, anytime, ever So I wouldn't bother even looking - stick with the Rody *cough*
...
Funny you should mention that, I've heard that there are no more FXs anywhere, anytime, ever
So I wouldn't bother even looking - stick with the Rody *cough*
09-04-2004, 12:30 PM
Originally posted by Sow&Steady
No wonder there are lownmowers all the time ... the track is huge!
No wonder there are lownmowers all the time ... the track is huge!
Mark ... go put a few "bus-stops" and chicanes ... that'll make lawnmowers go whre they belong ... on the grass!
But now you know why they like it so much.....all that grass to look after
09-04-2004, 12:32 PM
Originally posted by Sow&Steady
Ah so! YOU called them on-line shops and showed them the RING! That's why al of them tell me they don't have JPs left!
Ah so! YOU called them on-line shops and showed them the RING! That's why al of them tell me they don't have JPs left!
I've got to make good use of the times when D mislays the Ring, you know
09-04-2004, 12:37 PM
A picture which should have been on 3hobby
09-04-2004, 12:49 PM
Wow markp27 now i know what you meant about being in the middle of a forest
I must say that your track looks good and 14 seconds sounds like a really rapid laptime to me
I think on the full Grand prix circuit at Benarty its around 19 seconds/lap
I must say that your track looks good and 14 seconds sounds like a really rapid laptime to me
I think on the full Grand prix circuit at Benarty its around 19 seconds/lap
09-04-2004, 12:50 PM
Nice shells
09-04-2004, 01:08 PM
Originally posted by Denso#1
Wow markp27 now i know what you meant about being in the middle of a forest
I must say that your track looks good and 14 seconds sounds like a really rapid laptime to me
I think on the full Grand prix circuit at Benarty its around 19 seconds/lap
Wow markp27 now i know what you meant about being in the middle of a forest
I must say that your track looks good and 14 seconds sounds like a really rapid laptime to me
I think on the full Grand prix circuit at Benarty its around 19 seconds/lap
The 14 second laps are put down by the best guys in Germany
I've not had any timed laps with my 710, but with the 705 and a not too good of an engine, I was in the 15.5s.Apart from the big sweeper - which you see in the foreground and the fast right-left kink, the circuit is made up of flat out sections connected with hairpin bends - so in a sense, I suppose the circuit is quite large, as so much time is spent flat out.
Do you know how long a complete lap is at Benarty? Once round the Zollhausring in Nuremberg is 235 meters or 771 feet.
09-04-2004, 01:10 PM
Originally posted by Denso#1
Nice shells
Nice shells
As I couldn't drive today, I decided to finish off the shells which I'm preparing for my test of the Xray T1 Factory Kit and the Tamiya TRF-415 - I couldn't decide which would be better for me, so I bought the two of them to test fully - the better one I'll keep and the other goes onto Ebay.
09-04-2004, 01:52 PM
Originally posted by markp27
Slight optical illusion, the track is medium sized....14 second laps for the very fast guys
Slight optical illusion, the track is medium sized....14 second laps for the very fast guys
I could have driven a bus on there this morning after seeing all those lawnmowers, I can tell ya!
But now you know why they like it so much.....all that grass to look after
But now you know why they like it so much.....all that grass to look after
09-04-2004, 01:54 PM
Re: A picture which should have been on 3hobby
Originally posted by markp27
http://www.rctech.net/forum/attachme...postid=1077010
http://www.rctech.net/forum/attachme...postid=1077010
and they WILL be when I re-sign with a decent provider ... soon.
09-04-2004, 03:23 PM
Goes to show ...
Mark Bro ... goes to show that your track is for lawnmowers ... look at the starting grid ... its wider than even a 1:8th car!
09-04-2004, 04:27 PM
Suspended
Re: Goes to show ...
Originally posted by Sow&Steady
Mark Bro ... goes to show that your track is for lawnmowers ... look at the starting grid ... its wider than even a 1:8th car!
Mark Bro ... goes to show that your track is for lawnmowers ... look at the starting grid ... its wider than even a 1:8th car!
09-05-2004, 02:13 AM
Hubs & driveshafts
Watched the Florida Winternats today. Yes got it for fathers day. Anyway noticed one Michael Salven has Xray hubs but I could see what driveshafts he used. I tried my hubs and driveshafts from my Xray EVO 2 and the hubs fit perfectly but the driveshafts are to short.
If there is anyone that knows, it's got to be Sow&Steady or markp27. These guys seem to have so much time to tinker with there 710's. Anyway would appreciate any input also the plastic end on the Xray driveshaft would seem to negate the problem with the dogbone wearing a notch in the ball diff.
If there is anyone that knows, it's got to be Sow&Steady or markp27. These guys seem to have so much time to tinker with there 710's. Anyway would appreciate any input also the plastic end on the Xray driveshaft would seem to negate the problem with the dogbone wearing a notch in the ball diff.
09-05-2004, 04:23 AM
Re: Hubs & driveshafts
Originally posted by B4
Watched the Florida Winternats today. Yes got it for fathers day. Anyway noticed one Michael Salven has Xray hubs but I could see what driveshafts he used. I tried my hubs and driveshafts from my Xray EVO 2 and the hubs fit perfectly but the driveshafts are to short.
If there is anyone that knows, it's got to be Sow&Steady or markp27. These guys seem to have so much time to tinker with there 710's. Anyway would appreciate any input also the plastic end on the Xray driveshaft would seem to negate the problem with the dogbone wearing a notch in the ball diff.
Watched the Florida Winternats today. Yes got it for fathers day. Anyway noticed one Michael Salven has Xray hubs but I could see what driveshafts he used. I tried my hubs and driveshafts from my Xray EVO 2 and the hubs fit perfectly but the driveshafts are to short.
If there is anyone that knows, it's got to be Sow&Steady or markp27. These guys seem to have so much time to tinker with there 710's. Anyway would appreciate any input also the plastic end on the Xray driveshaft would seem to negate the problem with the dogbone wearing a notch in the ball diff.
Seems you have Sow and myself confused with InitialD Certainly from the DVD you can see that Michael is using the hubs and Hudy spring steel driveshafts, but I don't have any more information than that 