Engine Wars Thread
10-05-2003, 08:28 AM
#436
Re: HP?
Originally posted by dino.tw
I have a question!Why it is always horse power?Why not "Dog Power"?As I knew that Eskimo use Dogs to drag!
I have a question!Why it is always horse power?Why not "Dog Power"?As I knew that Eskimo use Dogs to drag!
Just Kidding. I don't know what happened with Tommy. I am sure will find out and will let you know.
10-05-2003, 08:47 AM
#437
Originally posted by Taylor-Racing
Sheesh . . . change the balls!
. . . and we thought I was cheap.
Actually, can you even get them apart?
And what do you do about the wear that still exists on the inner race, the outer race and the cage?
Sheesh . . . change the balls!
. . . and we thought I was cheap.
Actually, can you even get them apart?
And what do you do about the wear that still exists on the inner race, the outer race and the cage?
Changing the balls on a new bearing is like putting on the factory, bearing hasn't been under loads that marred the balls nor the bearing races so you have a very nice balls to discard and very fine looking bearing races to put ceramic balls.But is true... putting a straight new bearing is the best can be done.
10-05-2003, 08:52 AM
#438
Originally posted by Corse-R
But is true... putting a straight new bearing is the best can be done.
But is true... putting a straight new bearing is the best can be done.
10-05-2003, 09:04 AM
#439
Originally posted by Taylor-Racing
Sheesh . . . change the balls!
. . . and we thought I was cheap.
Actually, can you even get them apart?
And what do you do about the wear that still exists on the inner race, the outer race and the cage?
Sheesh . . . change the balls!
. . . and we thought I was cheap.
Actually, can you even get them apart?
And what do you do about the wear that still exists on the inner race, the outer race and the cage?
Last edited by Top Gun 777; 10-07-2003 at 04:02 PM.
10-05-2003, 09:05 AM
#440
next step
.
Last edited by Top Gun 777; 10-07-2003 at 04:02 PM.
10-05-2003, 09:06 AM
#441
next step
.
Last edited by Top Gun 777; 10-07-2003 at 04:03 PM.
10-05-2003, 09:06 AM
#442
last step
.
Last edited by Top Gun 777; 10-07-2003 at 04:03 PM.
10-05-2003, 09:10 AM
#443
Bearing service.
.
Last edited by Top Gun 777; 10-07-2003 at 04:05 PM.
10-05-2003, 09:17 AM
#444
Bearing parts
.
Last edited by Top Gun 777; 10-07-2003 at 04:03 PM.
10-05-2003, 09:25 AM
#445
Bearings
.
Last edited by Top Gun 777; 10-07-2003 at 04:04 PM.
10-05-2003, 09:55 AM
#446
Re: Bearings
Originally posted by Top Gun 777
Hey guys. Any comments?
Hey guys. Any comments?
How about a Bearing disassembly 101?
10-05-2003, 09:56 AM
#447
Re: Re: Bearings
Originally posted by Corse-R
None to say. In fact is almost the same I do for changing the balls... But you missed to explain how to disassemble the bearing.
How about a Bearing disassembly 101?
None to say. In fact is almost the same I do for changing the balls... But you missed to explain how to disassemble the bearing.
How about a Bearing disassembly 101?
10-05-2003, 10:08 AM
#448
Re: Re: Bearings
.
Last edited by Top Gun 777; 10-07-2003 at 04:04 PM.
10-05-2003, 07:02 PM
#449
Tech Fanatic
Thread Starter
There is a master tuner in HK who has done this procedure with the ceramic balls but i have forgotten his name.I have a pic of the bearing but unfortunately it is copyrighted.
I just remembered,his name is MR MTO !!!
I just remembered,his name is MR MTO !!!
10-05-2003, 07:03 PM
#450
Tech Fanatic
Thread Starter
Re: Re: Re: Bearings
Originally posted by Top Gun 777
Here it goes!
Here it goes!
