R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro On-Road (https://www.rctech.net/forum/nitro-road-3/)
-   -   Xray NT1 (https://www.rctech.net/forum/nitro-road/141149-xray-nt1.html)

rcfoolz 05-27-2007 07:17 PM

THE SOUTHWEST FLORIDA R/C ROUNDUP race report
 
This is a short blurb on the race, only on the sedan side. Facory drivers were at the race from Kyosho, Serpent, Mugen, and Xray. I know that thier is going to be a race report online in a couple places, in the next day or two, but in the A, Joe Sumasky drove his car to a Win and after a quick repair from a hard crash with another racer, James Burrows came back from 8th to finnish 4th in the A and In the B main, Chuck Parsons drove his car to a 1st place finnish. I only know the top 4 cars in the A:
Xray
Mugen
Serpent
Xray

When the race report is ready and published, I will post for those who wish to read it.

Nexus Racing 05-27-2007 08:13 PM

I was finally able to run my car for the first time today...this is going to be fun :D .

DaNNy671 05-27-2007 08:42 PM

Thanks for the race report rcfoolz...glad to see the NT1 doing well...looking fwd to more good news...

RevMaxx 05-28-2007 02:16 AM


Originally Posted by kitracer


http://teamxray.com/teamxray/news/n...9b1dc58857b5f9a

Xray NT1 came 2nd in China' biggest Race...... that was me



Originally Posted by LORD SHADO

x ray lack the guts to show the competion again. what car was first?





'twas hard to tell in the picture posted on the site what car was it with the drivers at the podium ........ till i saw the driver's shirt... :)

BIOMASS 05-28-2007 08:59 PM

2 Attachment(s)
My NT1 using serpent yellow spring, my first 1/10 GP race at FEMCA

royfan33 05-29-2007 06:58 PM

Springs
 

Originally Posted by BIOMASS
My NT1 using serpent yellow spring, my first 1/10 GP race at FEMCA

Speaking of springs...what other brands will fit the NT1? I was checking prices on one of the online stores and I ran across two sets by Xray one was $60 and one was $80 if I remember correctly. I didn't see how many sets and if they were front, rear or both, that came with either.

If the answer to this is posted previously I missed it somewhere along the way.

Also, any ETA for the front cva's? It would be great to get to install them as I build my kit.... :nod:
thanks,
Gary

jelayne 05-29-2007 09:41 PM

SOW any new NT1 reviews and comparisons? :cool:

BIOMASS 05-30-2007 02:31 AM


Originally Posted by royfan33
Speaking of springs...what other brands will fit the NT1? I was checking prices on one of the online stores and I ran across two sets by Xray one was $60 and one was $80 if I remember correctly. I didn't see how many sets and if they were front, rear or both, that came with either.

If the answer to this is posted previously I missed it somewhere along the way.

Also, any ETA for the front cva's? It would be great to get to install them as I build my kit.... :nod:
thanks,
Gary

Mugen MTX4 springs can also fit to NT1...... :D

Sow&Steady 05-30-2007 05:32 AM


Originally Posted by jelayne
SOW any new NT1 reviews and comparisons? :cool:

jelayne, its there, three part article.

Look in the "Content" area at 3hobby.net, under Product Reviews.

Sow&Steady 05-30-2007 05:35 AM


Originally Posted by jelayne
SOW any new NT1 reviews and comparisons? :cool:

Oh, and yes ... there's even a video of the test drive! :nod:

Look in the right hand sidebar, under Downloads.

SlamMan 05-30-2007 06:16 AM


Originally Posted by BIOMASS
Mugen MTX4 springs can also fit to NT1...... :D

Where can you get the Mugen or Serpent spring sets?

miker2209 05-30-2007 07:18 AM


Originally Posted by rcfoolz
This is a short blurb on the race, only on the sedan side. Facory drivers were at the race from Kyosho, Serpent, Mugen, and Xray.

Factory drivers? really? I was reading the entry list and the results and i see none!! So, what are you talking about? I see no Cyrul, no Tosolini, no Swauger, no Morganti, no Lemieux, no Burch, no etc. etc in the list.
Are you trying to score some brownie points with RCAmerica by posting this kind of stuff or what?

Congrats Joe for his victory!!

bvoltz 05-30-2007 08:04 AM


Originally Posted by royfan33
Also, any ETA for the front cva's? It would be great to get to install them as I build my kit.... :nod:
thanks,
Gary

I just got mine or should I say one of the two sets... So the LHS should be getting them shortly, or you can try www.nexusracing.com...

rmdhawaii 05-30-2007 09:14 AM


Originally Posted by SlamMan
Where can you get the Mugen or Serpent spring sets?

http://www.nitrohouse.com

royfan33 05-30-2007 09:17 AM


Originally Posted by BIOMASS
Mugen MTX4 springs can also fit to NT1...... :D


Originally Posted by bvoltz
I just got mine or should I say one of the two sets... So the LHS should be getting them shortly, or you can try www.nexusracing.com...

thanks guys. :nod:


All times are GMT -7. It is currently 02:36 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.